Update on my phono preamp:

J!m

J!m

Veteran and General Yakker
#27
Joined
Dec 24, 2019
Messages
10,650
Location
Connecticut
Tagline
BOT
#27
I'm not sure how much farther their prices CAN go up.

I have very little from them, because I can get Mitutoyo gages for significantly less, and of equal quality. Here at work, the much cheaper SPI brand is plentiful...
 
mlucitt

mlucitt

Veteran and General Yakker
#28
Joined
Jun 24, 2011
Messages
3,466
Location
Jacksonville, FL
#28
J!m said:
I'm not sure how much farther their prices CAN go up.
Click to expand...
I went to the Starrett factory in Athol, MA and took a tour of the place. It is a turn of the century national treasure.
If you want to see the Athol that is in MA, you have to drive 80 miles East out of Boston, but watch out because there are a lot of Athol's there too.
Couldn't resist.
 
WOPL Sniffer

WOPL Sniffer

Veteran and General Yakker
#31
Joined
Aug 10, 2015
Messages
11,522
Location
Minnie-Soda
Tagline
Screw it
#31
Gepetto said:
Perry is back. Got a roof yet?
Click to expand...

should hear more Monday or Tuesday. They paid for 10 shingles which doesn't sound like much but it shows they acknowledge there is damage. Now my roofer will hit them with "I can't find a match to these faded shingles" so........ we are working it. I've been pulling drywall and insulation from inside the garage and replacing it with fresh stuff. Had a few spots that needed replacing so it is all gonna get done. Did I mention I hate fuckin with insulation??? I do.......
 
Gepetto

Gepetto

Administrator
Staff member
#32
Joined
May 15, 2011
Messages
13,909
Location
Sterling, MA
Tagline
Old 'Arn Enthusiast
#32
WOPL Sniffer said:
should hear more Monday or Tuesday. They paid for 10 shingles which doesn't sound like much but it shows they acknowledge there is damage. Now my roofer will hit them with "I can't find a match to these faded shingles" so........ we are working it. I've been pulling drywall and insulation from inside the garage and replacing it with fresh stuff. Had a few spots that needed replacing so it is all gonna get done. Did I mention I hate fuckin with insulation??? I do.......
Click to expand...
especially in humid summertime
 
J!m

J!m

Veteran and General Yakker
#34
Joined
Dec 24, 2019
Messages
10,650
Location
Connecticut
Tagline
BOT
#34
I bet it’s not rock wool. That shit made me welt up when I tore the corner off my house to repair it. I looked like Fat Bastard with twice the profanity.

Make sure you spring for fire code Sheetrock adjacent to the living space. Not a bad idea all around but… money.
 
J!m

J!m

Veteran and General Yakker
#35
Joined
Dec 24, 2019
Messages
10,650
Location
Connecticut
Tagline
BOT
#35
Sorry to bring us back on topic, but, Wyn has reviewed the pre production samples and it looks like the less expensive version will be available ASAP- around $200-$300!!! That is a lot of phono pre for the money. You literally can’t DIY that for the same money.

The flagship should be under two grand and still an amazing bargain.

I have a good idea who the vendor will be but I will not speculate because, I may be wrong, but also because I was asked not to broadcast anything until it is officially released.

Bottom line: fir very little money you will soon be able to get a world-class phono preamp.

The cheap one uses a Wal wart, so there will be opportunities to improve that, including a battery pack (what I’d do) because draw is low. The cheaper one’s specs are still world class. And it supports MM and MC with adjustable loading, extra 10dB gain switchable and the same improved elliptic filter of the V3 diy version (I’m a bit jealous of that actually).
 
mlucitt

mlucitt

Veteran and General Yakker
#38
Joined
Jun 24, 2011
Messages
3,466
Location
Jacksonville, FL
#38
NeverSatisfied said:
Are you looking for something in particular or a certain price range ?
Click to expand...
I wish I could say "Price is no object." But these days everything is dear.
I would like something I could pass on to my heirs (long-lived) and something with a decent tonearm. Belt-drive is fine (because - vintage, as opposed to direct drive, I don't care for idler wheels), semi-auto would be a nice feature, but manual is OK too.
I prefer Made in USA, but Made in the UK is acceptable.
Turntables used to be cheap... Any turntable today, with the above credentials, less than $500 would be tolerable. Most of the ones I see on ebay are around $1000, and they need work. Possibly people cashing in on the turntable craze, is flipping a turntable a thing?
 
krellmk

krellmk

Chief Journeyman
#40
Joined
Nov 3, 2016
Messages
719
Location
Brooklyn NY
Tagline
Are you satisfied with the life you're living
#40
J!m said:
Sorry to bring us back on topic, but, Wyn has reviewed the pre production samples and it looks like the less expensive version will be available ASAP- around $200-$300!!! That is a lot of phono pre for the money. You literally can’t DIY that for the same money.

The flagship should be under two grand and still an amazing bargain.

I have a good idea who the vendor will be but I will not speculate because, I may be wrong, but also because I was asked not to broadcast anything until it is officially released.

Bottom line: fir very little money you will soon be able to get a world-class phono preamp.

The cheap one uses a Wal wart, so there will be opportunities to improve that, including a battery pack (what I’d do) because draw is low. The cheaper one’s specs are still world class. And it supports MM and MC with adjustable loading, extra 10dB gain switchable and the same improved elliptic filter of the V3 diy version (I’m a bit jealous of that actually).
Click to expand...

Jim did you look at this

https://hagerman-audio-labs.myshopify.com/collections/phono-preamps/products/bugle2
 
You must log in or register to reply here.
Top