THEY"RE HERE!!!!!!!!!!!!!!!!!!!!! SONIPHASE S6

I didn't use anything, With everything being flat and the amount of screws (15) there was no leaking. I thought about a thin film of silicone and let it dry before putting the hatch on if it leaked but had no leaks
 
Last edited:
Tryin, doing a lot of phone calls. Field folk and now Steve, looks like we'll be awhile.
 
Short Steve call this time. Got the oldest son Levon to come over and help me get em in the nancave.
 

Attachments

  • 100_1255.jpg
    100_1255.jpg
    95.7 KB · Views: 44
  • 100_1257.jpg
    100_1257.jpg
    94.6 KB · Views: 34
Last edited:
To close now. Yep , will fire em up tonight!!!
 

Attachments

  • 100_1258.jpg
    100_1258.jpg
    90.1 KB · Views: 37
I squeezed the seal between the motorboard and the cutout to almost nothing, seemed the right thing to do considering what is goin on in there.
 
Yea, Squeeze them tight, all nylon lock nuts and all the lock washers should keep anything from loosening up. The Tee nuts all have been super glued into the motorboard
 
30-40 minutes from takeoff.
 

Attachments

  • 100_1260.jpg
    100_1260.jpg
    91.5 KB · Views: 48
  • 100_1259.jpg
    100_1259.jpg
    90.6 KB · Views: 52
Had to move a lot of stuff out of the way, hooking the speakers to the amp now. D-23 hooked to pre-amp and amp. Not long now!!!
 

Attachments

  • 100_1262.jpg
    100_1262.jpg
    93.9 KB · Views: 45
  • 100_1261.jpg
    100_1261.jpg
    88.9 KB · Views: 35
OH MY GOD PEOPLE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 
WOW!!!!!!!!!!!!!!!!!!! Playin with slope, cutoff and tryin to dial em in with the K-Horns------ I think they're going to play very well together !!!!!!!!!
 
I know the Spec 2 ain't gonna keep up. Had the needles buried on the Spec and had to dial back the Larrt's 700 on the K's. Mark-----it was a wise thing to gather up the Carver beastie, now I have some incentive to build the 1.4KW monster with the white Oak board
 
Talk about movin heaven and earth!!!!!!!!!!!!!!!!!!!!!!!!!!!
 
Lot of time/frequency issues to deal with. But I think when they get back in the corners with the K's that will all work out.
 
You must log in or register to reply here.
Back
Top