Russ' 700B Wopl

[grapplesaw]

I put the IEC plug in this way in the stock chassis. Joes has so much more room to work in.

I put the fuse into the power cord hole and cut out the fuse hole for the plug. It fits. With Joes case it's almost like I must have something out there is to much empty space. Amazing what a 1/4 inch here and there will do.

 

[laatsch55]

Especially on the height to get clearance for the backplanes...

 

[laatsch55]

New chassis mated to the transformer...

 

[laatsch55]

New BR , bypassed...

 

[laatsch55]

AC wiring done. I found some nice #14 ,105degree, machine tool wire, just perfect for what we need on the AC side.,..The IEC jack and thermoswitches, AND the transformer terminal strip have holes big enough for #14....

 

[laatsch55]

Backplanes in, time to wire....

 

[laatsch55]

Caps and BABB in......

 

[laatsch55]

Building the DC protect right now...

 

[laatsch55]

DCP done....

 

[laatsch55]

Rev "E" board...

 

[laatsch55]

Another hour and we'll have it...

 

[laatsch55]

Done....

 

[laatsch55]

Separating the pot wiring fom the meter wiring and dressing them up...

 

[Gepetto]

Separating the pot wiring fom the meter wiring and dressing them up...

Looking good Lee. Russ will be a happy camper.

 

[laatsch55]

Thanks Joe....relieved is more like it. I've had it since October.....If I ever get a few hours it'll get done...

 

[Gepetto]

Thanks Joe....relieved is more like it. I've had it since October.....If I ever get a few hours it'll get done...

Yeah I know you have been flat out Lee...

 

[laatsch55]

Supposed to be 70 degrees here today. Outside cleaning heatsinks today.....

 

[laatsch55]

Heatsinks and outputs....

 

[laatsch55]

3 out of the 4 heatsinks went ok, then the 4th.....had to relieve one set of out holes, were into a D drill already...looks like I'll have to slot this one....

 

[laatsch55]

Got em coaxed in there.....