Gentlemen, We Have Hit 350 Members !!

laatsch55 said:
I don't think the 400 power supply is capable of that. What I know for sure is a stock 700 with a neutral tranny(100+/-DC rails) will do 736 per and up. With a hot tranny god only knows.

Now remember these are the absolute max ratings, I would not advertise them as continous. For that to happen we would have to add a few more outputs per side and 2-3 times mire heat sinking WITH FORCED AIR COOLING.
Click to expand...

I was referring to the 315 doubled so 630 per side theoretically possible? Can a bigger tranny be used. I have a few monster sized ones in the garage. How about the big Drakes?

Heat is the real issue yes, especially with a 4 finner. I wondered about mounting two small computer fans on the top plate since that's the only place they would fit. I do have a 8" clip on fan on the back of the entertainment stand blowing directly on the WOPL when I feel like putting the gas to her though. Wish there was a 8 fin conversion plate of some sort. It's never gotten so hot that I can't touch the sinks but they have been pretty warm a few times
 
Northwinds said:
I love the way they look on the inside. That's when amps were amps, I think the 70s was the era of the coolest looking equipment, not only sounding good but the huge intimidation factor! I look at Dennis' and Lee's walls of power and drool!
Click to expand...


I like the look and more importantly the sound of this. Has an intimidating quality to it and not made in the 70's......

100_3699_zps8082fa47.jpg



100_3712_zpsc47cb2cd.jpg



I'll be sticking with this one until I can save up enough money to get a treasure from Lee and see how they stack up against each other......
 
I have custom built twin "snap-o fan assemblies for the WOPL"s forr a couple years now....
 

Attachments

  • DSCN0145.jpg
    DSCN0145.jpg
    98.8 KB · Views: 33
  • DSCN0146.jpg
    DSCN0146.jpg
    94.3 KB · Views: 26
  • DSCN0147.jpg
    DSCN0147.jpg
    94.2 KB · Views: 23
  • DSCN0148.jpg
    DSCN0148.jpg
    102.4 KB · Views: 27
  • DSCN0149.jpg
    DSCN0149.jpg
    99 KB · Views: 26
  • DSCN0150.jpg
    DSCN0150.jpg
    103.7 KB · Views: 25
  • DSCN0151.jpg
    DSCN0151.jpg
    79.2 KB · Views: 26
Rex Everything said:
I like the look and more importantly the sound of this. Has an intimidating quality to it and not made in the 70's......

100_3699_zps8082fa47.jpg



100_3712_zpsc47cb2cd.jpg



I'll be sticking with this one until I can save up enough money to get a treasure from Lee and see how they stack up against each other......
Click to expand...
I told ya you can audition one. I'll have another 700 ready in a couple weeks, PM your address...
 
The WOPL topology has withstood 110 volt rails for days non-stop, so theoretically , yes a doubling of the 8 ohm rating is possible with the right tranny, more output pairs and forced cooling.
 
laatsch55 said:
I don't think the 400 power supply is capable of that. What I know for sure is a stock 700 with a neutral tranny(100+/-DC rails) will do 736 per and up. With a hot tranny god only knows.

Now remember these are the absolute max ratings, I would not advertise them as continous. For that to happen we would have to add a few more outputs per side and 2-3 times mire heat sinking WITH FORCED AIR COOLING.
Click to expand...

I'm glad we don't have Google Adsense as every time hot tranny was mentioned in a thread on our Usenet old radio group back in '99 or so they would come up with hot tranny porn :shock: :happy7: :sign6:
 
laatsch55 said:
The WOPL topology has withstood 110 volt rails for days non-stop, so theoretically , yes a doubling of the 8 ohm rating is possible with the right tranny, more output pairs and forced cooling.
Click to expand...

I guess thats why the 1801 has the monster 42lb transformer.
 
laatsch55 said:
Proves how serius they were and the bean counters weren't running things yet...
Click to expand...

Yes they started strong with those pieces. Too bad they went the way they did. They discontinued the 1800 a few years back. Would still love to try a Series VI 1800. My cousin has a Series II 1800. Pretty much the same as an 1801 with a different front end.
 
Nando will post an eligible mem,bers list, after which Jani will draw the numbers that will be assigned each member for this particular drawing....I will then post that list and the countdown can begin....
 
Here is the list of eligible members. Good luck to all!



Nando.
 
Elite-ist said:
Here is the list of eligible members. Good luck to all!



Nando.
Click to expand...


That right there is a bitter sweet thing to see. It's awesoem to see the sight taking off like it has in the past year but it's sad to see all the competition for all these sweet contests, especially this one :)
 
You must log in or register to reply here.
Back
Top