Search results

  1. rtp_burnsville

    Today's Project Panasonic RX-5040

    Stuwee said not to have idle hands in the other thread so here is another I just finished this afternoon. It's a Panasonic RX-5040 boombox from college that I have running once again. Mainly just needed new belts, a good cleaning of the controls, and it's off and running. Forgot about this...
  2. rtp_burnsville

    Sony TC-WR645s

    Hi Guys, On the way out of work today a Sony TC-WR645s cassette deck was just sitting there on a table with a 'Free' post-it note attached. Needless to say it followed me right out the door. :) Now why in the world there was a cassette deck where I work I haven't a clue as the clowns there...
  3. rtp_burnsville

    Nakamichi Part Search BX125

    Hi Guys, I know, I am getting to be a real pest.... This time does anyone have a source for a replacement output volume control for a NAK BX-125? Picked up a like new deck that needed a tire but also has a problem I traced to a bad section of the dual gang volume pot. Here is the info I...
  4. rtp_burnsville

    Question: Teac 2340R

    Hi Guys, Does the TEAC 2340R have the multi-tracking simul-sync capability? I have searched around the internet but have not been able to find an answer. There is a cheap one that popped up here and I have a few old tapes I would like to transfer. I know that one does not need the sync...
  5. rtp_burnsville

    TEAC MB-20

    Here is something I forgot I even owned that is rather cool. It's a meter bridge that Teac had for their model 2 mixing board ages ago. Looked for years for a bridge to go with the mixer then gave up looking after a couple years and sold the board. Well you know the story, up pops a bridge a...
  6. rtp_burnsville

    JVC DD-5J Cassette Deck

    Hi, I picked up this JVC for almost nothing. I really wasn't expecting much but it really does not sound all that bad. I am guessing it must be sort of an entry level deck but it has some different features for a deck in that range. First, it's direct drive which was rather surprising. The...
  7. rtp_burnsville

    Tascam 112B Motor Questions

    Hi Guys, Tonight I dug into my Tascam 112B and have a few questions. I believe the capstan motor is trashed but have a couple questions: 1)Does anyone have a clue as to what the color code of the capstan motor wires are? The motor is a Sanyo marked with SHW2L, 00-0206A. It's a CCW rotation...
Top