Derek92994's 700 Ser II White Oak conversion

[laatsch55]

Yes Joe, the bias trannies are wired right.,....here we go,,,

 

[laatsch55]

With rail voltage at 103.7, bias dialed right in and very good offset numbers....a very uneventful first power up...

 

[laatsch55]

Got a lot of stuff to move over to the rack to put it on the horns. And , gonna need the variac to run power to the DCP.....

 

[laatsch55]

The set-up....

 

[JustMike]

The set-up....

Great set-up Lee !!

This vid just for u man

http://www.youtube.com/watch?v=QuoKNZjr8_U

 

[laatsch55]

Funny shit there Mike!!

 

[derek92994]

Wishing you luck Lee, I bet it all works out fine. So you are emulating 120 volts to 240 volts?

 

[Gepetto]

Yes Joe, the bias trannies are wired right.,....here we go,,,

You know me so well Lee...

 

[derek92994]

Hey look at this Lee, I found an amplifier which tells you when its HALF BIASS, check this out

 

[laatsch55]

And you me...fighting some high DC on the outputs right now. Must have a whisker somewhere. When I tried to put it on the horns the DCP wouldn't release. 100 volts DC on the outs. Chasing it now..Lot of voltage, no current..

 

[laatsch55]

Funny shit D2!!

 

[derek92994]

Funny shit D2!!

You know me

I'm off to northside to help a friend in need. Be back this afternoon australian time. OI!

 

[laatsch55]

Later Bud...

 

[derek92994]

So what's happening with this "DC" issue? Still on Cloud 9? hehehe

 

[laatsch55]

Rail voltage on the speaker outs. Very bad thing..

 

[Northwinds]

Rail voltage on the speaker outs. Very bad thing..

Unless your building an electric chair!

 

[Skynyrd77]

Missed the action yesterday!!! Dundee2 gonna have a WOPL
once lee gets it right we can see if we can create a WOPL tidal wave!!!
from one country to the nxt!

 

[derek92994]

You got that right. So many parts and countless amounts of soldering it would be easy for something to go amiss, I'm sure its a fairly simple problem. Its the nature of the beast being an 'Electron Herder'.

 

[laatsch55]

Probably an errant cut lead or whisker from the twisted pair shield.....

 

[derek92994]

Probably an errant cut lead or whisker from the twisted pair shield.....

Ahhh the man is back. What ya up to Lee?