The K-Horns are coming ! The K-Horns are coming !!!!

[laatsch55]

Tims Soni's will chase spiders out of the house ..

 

[kevin]

I will take some pic's of the rear... and the back of the horn cabinets... And the woofer door !

Not real good pics... But I took a couple..

 

[kevin]

This stain makes em shine.... First coat on one of the bottoms

 

[kevin]

Tims Soni's will chase spiders out of the house ..

But..... Will they go lower than your Horns ??????????????

 

[ksrigg]

So, are they sealed or vented?

 

[kevin]

O we knew yesterday they were sealed.... No doubt about that man... GOOD MORNING Rigg !!! How are ya pal ?

 

[laatsch55]

But..... Will they go lower than your Horns ??????????????

No...

 

[kevin]

OK..... Thanks...

 

[BubbaH]

Man those things are lookin sweet.

 

[kevin]

LOL... I was pretty sure I had the right ones..

 

[kevin]

Man those things are lookin sweet.

Thanks Pal... I'm going to give Sutton the credit on the Looks part !!! He just went out in his building... Grabbed a couple rolls of Veneer.... Came over to the house and slapped it on there... All I gotta do is about 6 coats of stain !!!!!!

 

[laatsch55]

So, are they sealed or vented?

Sutton....picture an 8ft long 4 foot X 4 foot square mouthed horn folded and split into a corner with the back of the woofer in a sealed box....tha's what you have.

The front of the woof fires through a 3" X 13" hole in the motorboard which forms the mouth of the horn.

 

[laatsch55]

LOL... I was pretty sure I had the right ones..

Oh yeah, you had the right ones..

 

[ksrigg]

I am going to mod these La Scalas (with Kevin's help) and we will see how they compare. I'm going to do the "dog house" mod on them and make the cabinets 5 cubic feet vented. I think that gives about a 30 hz tuning frequency. According to Dave Harris they will give the KHorns a run....

If they don't...I'm going to get me some KHorn cabinets....

Thread to follow....as soon as Kevin is up and running..

 

[laatsch55]

Might give Em a.run. but won't run Em down..

 

[ksrigg]

I know they won't be near the speaker...but I hope they aren't too shabby either....I'm looking for cabinets already...keep your ears to the ground..

 

[laatsch55]

Hookay..

 

[laatsch55]

Kev, on the mid horn you have to separate the 2 back pieces then bolt the mid driver to the very back one then bolt the two wood pieces back together...

 

[kevin]

OK...That makes good sence.... Yea... I can do that !!!

 

[laatsch55]

The horn side of the back piece is countersunk for the bolts holding the driver to the back piece...