WOPL coming to market

WOPL Sniffer said:
Here is a couple quick shots. "Bentley Blue" is in Burn-In...... It's kinda hard to get the gist of it with the lighting but I'll get some good ones tomorrow after testing and button-up. Looks nice though.

I don't like the knobs so I'm gonna try another set.

View attachment 36960View attachment 36961View attachment 36962View attachment 36963
Click to expand...
Well done Perry

As a suggestion for knobs I like the multicomp 38mm knob. Check out these 32mm knobs on eBay. 142319911337

I also use the 38 mm size
 

Attachments

  • 5ACEC2EB-15DB-444F-A22D-64D802502B49.jpeg
    5ACEC2EB-15DB-444F-A22D-64D802502B49.jpeg
    1.4 MB · Views: 14
WOPL Sniffer said:
Fred, I use Rustoleum textured Black, and top it off with a couple coats of clear........
Click to expand...
Next time your having parts scanned for cnc code like you did for the handles, Maybe get the meter bezels done.
I'd like some metal that could be chromed. Or just copper or brass or bronze would look cool too. I think you could sell a bunch. Or at least a couple dozen. And something HAS to be done about getting new VU meters made. You could corner the market! ( If there is one?)
 
Bradrock said:
Next time your having parts scanned for cnc code like you did for the handles, Maybe get the meter bezels done.
I'd like some metal that could be chromed. Or just copper or brass or bronze would look cool too. I think you could sell a bunch. Or at least a couple dozen. And something HAS to be done about getting new VU meters made. You could corner the market! ( If there is one?)
Click to expand...


Money my brother.... Money

Handles were easy compared to the bezels.

700B meters are not worth messing with. I still suggest using a picture of granny in the holes if a meter goes tit's up. But, on a positive note. I have yet to see a meter go out (besides the melted one from the bulk cap explosion).
 
Bradrock said:
Next time your having parts scanned for cnc code like you did for the handles, Maybe get the meter bezels done.
I'd like some metal that could be chromed. Or just copper or brass or bronze would look cool too. I think you could sell a bunch. Or at least a couple dozen. And something HAS to be done about getting new VU meters made. You could corner the market! ( If there is one?)
Click to expand...


The original bezels can be chromed OR..... I polished a set to a chrome like finish and then cleared them. They can also be Chrome powder coated.... Your choice.
 
I hate chrome. I had all the shit on the harley black powder coated because polishing shit is a waste of time. Chrome don't get you home, and paint, makes it what it aint!!!!
 
Looks like I can continue with the Series II build now. Not gonna paint it though, Joe's chassis' are sweet all by themselves.
 
WOPL Sniffer said:
My buddy calls it "Precious Metal".... But he's a knucklehead and would rather cover rust and shit with chrome doo-dads......
Click to expand...

Forgot to say.....compliments on the blue build. You not using those "WOPL 1000 Watts RMS" inserts anymore?
 
OK then.

In 2014, I think, Lee sent me a NOS power switch and I took this opportunity to install it. My middle name is Procrastination. What this amp's had for a power switch for as long as I've had it (29 years and God that makes me feel old) was an ancient Bakelite switch probably harvested from a big ol' TV set then tile nipped to size.

When I pulled the 700 to swap plates, I stuck the 400 in it's place which I think I'll leave there for a while. At present, the 700 still sits on what used to be my dining table in what used to by my dining area.

I either need better lighting for photos or buy better than the $10 & $20 cameras I've been getting off Craigslist.

One of these days, I may ask you how to re-connect the level control pots. Still there but non functioning since it had it's conversion.

IMG_4156.JPG
 
62vauxhall said:
OK then.

In 2014, I think, Lee sent me a NOS power switch and I took this opportunity to install it. My middle name is Procrastination. What this amp's had for a power switch for as long as I've had it (29 years and God that makes me feel old) was an ancient Bakelite switch probably harvested from a big ol' TV set then tile nipped to size.

When I pulled the 700 to swap plates, I stuck the 400 in it's place which I think I'll leave there for a while. At present, the 700 still sits on what used to be my dining table in what used to by my dining area.

I either need better lighting for photos or buy better than the $10 & $20 cameras I've been getting off Craigslist.

One of these days, I may ask you how to re-connect the level control pots. Still there but non functioning since it had it's conversion.

View attachment 36969
Click to expand...


Let me get this straight, you are trying to hire Glen to work on your amp, in a thread I have set up to sell an amp???? Is that about right??? How's about you PM him for this?? Thanks
 
62vauxhall said:
OK then.

In 2014, I think, Lee sent me a NOS power switch and I took this opportunity to install it. My middle name is Procrastination. What this amp's had for a power switch for as long as I've had it (29 years and God that makes me feel old) was an ancient Bakelite switch probably harvested from a big ol' TV set then tile nipped to size.

When I pulled the 700 to swap plates, I stuck the 400 in it's place which I think I'll leave there for a while. At present, the 700 still sits on what used to be my dining table in what used to by my dining area.

I either need better lighting for photos or buy better than the $10 & $20 cameras I've been getting off Craigslist.

One of these days, I may ask you how to re-connect the level control pots. Still there but non functioning since it had it's conversion.

View attachment 36969
Click to expand...

Damn Gary, you need a maid to mow your carpet..........
 
You must log in or register to reply here.
Back
Top