The first of 4, PRO 700'S just showed up on the stoop
- Thread starter WOPL Sniffer
- Start date
WOPL Sniffer
Veteran and General Yakker
I FINALLY SEE THE BOTTOM OF THE PILE!!!!!!! 1.25 WOPLS LEFT TO COMPLETE.
e30m3mon
Chief Journeyman
I like that faceplate with those switches. Nice work Perry!
WOPL Sniffer
Veteran and General Yakker
I just need to build the G1 board, and, I THOUGHT I had a new Cylon kit for it but I don't see it on the shelf...... Damn. The last amp will be sitting till who knows when. It's a Pro 700 and I haven't decided what to do with it.
I want to move on to the Rek O Kut resto and the gent who wanted the Crown, is hemming and hawing so I think I'll get it up and running and flip it.
I want to move on to the Rek O Kut resto and the gent who wanted the Crown, is hemming and hawing so I think I'll get it up and running and flip it.
WOPL Sniffer
Veteran and General Yakker
It's a PITA to fit the switches to the inner face plate for sure. I don't think I'll do another. If it isn't perfect, or near perfect, the outer face won't fit well and bind the switches. PLUS, you need to have some spare buttons which I do.
WOPL Sniffer
Veteran and General Yakker
I have the Ipod plugged straight into the 400 WOPL to let it continue before going into the system later. It sounds GREAT. I forget how awesome these Epicure 20+ speakers sound. I'm glad I rebuilt them after the PO put full power from the Clair Brothers WOPL to them and THEN hit the button for the Pre...
- Joined
- Jan 14, 2011
- Messages
- 75,407
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
Bet it was loud for a few microseconds ...
WOPL Sniffer
Veteran and General Yakker
The cones were extended ALL the way out, I had to push them back in but in the end, I sent the woofs to Midwest Speaker repair to get them repaired. It wasn't cheap but it was well worth it.
- Joined
- Jan 14, 2011
- Messages
- 75,407
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
No doubt...
WOPL Sniffer
Veteran and General Yakker
ready for cleaning #2 before I put the parts with big footprints. There are some hiding places that I like to make sure are clean so no solder balls/lead clippings/boogers etc.... find a roosting spot to cause havoc down the road. Then a trip under the scope. Crappy pic, time to get a new phone.
WOPL Sniffer
Veteran and General Yakker
And, another crappy pic but it's built and it will get at least one more cleaning and another trip under the scope. Hey Joe, What's taking you so long??? I ordered the Cylon Kit at least 10 minutes ago and they haven't showed up yet!!! 
Slacking off again Perry...And, another crappy pic but it's built and it will get at least one more cleaning and another trip under the scope. Hey Joe, What's taking you so long??? I ordered the Cylon Kit at least 10 minutes ago and they haven't showed up yet!!!
View attachment 73064
WOPL Sniffer
Veteran and General Yakker
This amp is all done except for the display boards. It even got new 2 meg fuses for a lifetime of enjoyment. Pics coming.
WOPL Sniffer
Veteran and General Yakker
Slacking off again Perry...
You know, with feet of snow, you should be getting more done because you are not laying around on your lawn chair in yer thong
e30m3mon
Chief Journeyman
Ya know ... I went and checked my inventory of ceramic fuses for 0 or damn near 0 Ohms because of you
WOPL Sniffer
Veteran and General Yakker
Ya know ... I went and checked my inventory of ceramic fuses for 0 or damn near 0 Ohms because of you
Yep, ya just never know what the world of trons will throw at you. Seen a lot of crazy shit but that was up near the top.
WOPL Sniffer
Veteran and General Yakker
We don't need no stinkin meters.
Grandma and grandpa were real looker's EH???
Grandma and grandpa were real looker's EH???
WOPL Sniffer
Veteran and General Yakker
mr_rye89
Veteran and General Yakker
Which ones grandma and which ones grandpa?