Stu's 1000 post Xers, Inspection, fix, test and ship.

[laatsch55]

Yep.

 

[laatsch55]

Jer, did you get the 2 Larry sent??

 

[laatsch55]

Stuwee, we will bypass the input buffer on your pair(of amps) today and see what happens.

 

[stuwee]

Stuwee, we will bypass the input buffer on your pair(of amps) today and see what happens.

Okey Dokey, don't hurt'm, you speak very highly of Joe, so I guess you two know what your doin'

 

[jbeckva]

Jer, did you get the 2 Larry sent??

Yep. That what I was working on last night. So you're saying that you'll bypass the entire buffer circuit and hook the RCA straight into the amp board, right? What (just wondering) is the reason to do that? Did you do the "fix" first and then it didn't work? (where'd ya get the 100 ohm SMD's if so).

What'll be needed to change out on the amp board to support a direct input?

 

[laatsch55]

Joe is an industrial servo amp designer by trade, flys all over the country solving amp type problems. You don't fly people from Massachusetts to Washington state for coffee. Wait till you see his new PL14A/B- 20 replacement PCB's...........a thing of beauty.

 

[laatsch55]

Have you checked out his LED, cap upgrade boards on E-Bay, goes by Gepetto on the bay.

 

[laatsch55]

Jer, the 100 ohm ers were going on the Tl-072 board. it has been decided thats where the gain problem originates. we are bypassing the whole board. Input coupling caps are C1,2, 16, 17 on the amp board. We will upgrade those with <http://www.mouser.com/ProductDetail/Xicon/1429-1474/?qs=sGAEpiMZZMvCt%252bwg%252braTugJwlx7%2fZmI%2ffq8QOee60ww%3d>

PS, if you don't want to install new rca's go from + pad on c49 on the opamp board to the R1 pad on the amp board from the + on the c52 pad on the opamp board to R5 on the amp board.

 

[jbeckva]

Where's a skeezer? Got one?

So are you waiting for parts, time, more testin'?

 

[stuwee]

Have you checked out his LED, cap upgrade boards on E-Bay, goes by Gepetto on the bay.

I just looked him up, nothing for sale or to view, more info please, he sounds very interesting.

 

[laatsch55]

Check out White Oak Audio.

 

[laatsch55]

Where's a skeezer? Got one?

So are you waiting for parts, time, more testin'?

No Jer, that cap link was for an UPGRADE, NOT an essential swap. Get after it.

 

[laatsch55]

Skeezers are in the vault at the Skunkworks i guess.

 

[jbeckva]

Where's a skeezer? Got one?

So are you waiting for parts, time, more testin'?

No Jer, that cap link was for an UPGRADE, NOT an essential swap. Get after it.

Ya got an email....

 

[speakerman1]

What parts are we going to need. Lee you need to fwd the emails from John to Jerry.

Larry

 

[laatsch55]

I will. No parts yet larry unless we do the power supply.

 

[speakerman1]

I'm pretty sure I have another email from John. Haven't checked yet.

Larry

 

[laatsch55]

What's with the "Mean Moderator" in your sig?? Feelin froggy today?? Wanna go a couple rounds??

 

[speakerman1]

Been there awhile now. LOL

Larry

 

[stuwee]

What's with the "Mean Moderator" in your sig?? Feelin froggy today?? Wanna go a couple rounds??

Watch it Larry, Jazz may be a stinker, but his other kitty is badass!