Stu's 1000 post Xers, Inspection, fix, test and ship.

[speakerman1]

And the old fart knew THIS, I BET HE'S IN HIS RECLINER , 700 PEGGED OUT LHAO!!!!!

2 Things to note. The old fart didn't know and he doesn't have a recliner. LOL Now there how is that going for you.

Larry

 

[speakerman1]

Jerry I sent resistors. They won't work huh? Tell me where and a PN and I'll get them. I have to look through all my email to find the directions.

Larry

 

[stuwee]

I did get a stable 30.56 volts with an 8 ohm load at 3, 567 hz. didn't last long and had to be on the sig generator output to keep it there. I think I'll bypass the input buffer and try again.

Power= voltssquared/ resistance
Power= 30.56x30.56=933.31/8= 116.74 watts.

Well, that ain't gonna cut it! Need more power lot's more power

Have you emailed Mark to see what might need to be done? Or has he already made suggestions, and I missed that part?

 

[speakerman1]

I did get a stable 30.56 volts with an 8 ohm load at 3, 567 hz. didn't last long and had to be on the sig generator output to keep it there. I think I'll bypass the input buffer and try again.

Power= voltssquared/ resistance
Power= 30.56x30.56=933.31/8= 116.74 watts.

Well, that ain't gonna cut it! Need more power lot's more power

Have you emailed Mark to see what might need to be done? Or has he already made suggestions, and I missed that part?

You have been asleep Stuwee. There are suggestions; but I really don't think they will fix what is going on. Will see what is going on by the end of the week.

Larry

 

[stuwee]

Alrighty then, I can wait. I'd rather have them worked over with Lee's magic hands properly, than have a pair of fried, smoking, spitting sparks ML's.

 

[laatsch55]

Got another guy on it Stu, gonna be way better than the original concept.

 

[stuwee]

Right On! You both have to sign the tops of the cases for me, K?

 

[laatsch55]

Yeah, that and buck will get you a cup of coffee!!!!

 

[stuwee]

Aw, come on buddy, I'll buy ya a bottle of Crown when you come down for X-Mas!!

Pretty pleeeease?

 

[laatsch55]

Now that I can handle, we'll sit on the daughters porch, in my shorts and t-shirt knocking back some crown and cokes in the dead of winter while my kids freeze their ass off keepig us in coin. I like that idea!!

 

[stuwee]

Alrighty then that's a date!

 

[jbeckva]

Hey Lee

Howd you get that *&^*&'ing input board out with all that black spOOge holding it in???

(mussin fussin)

 

[laatsch55]

Razor Knife.

 

[jbeckva]

Got it (new blade helped)

Thank you, M'Man!

 

[laatsch55]

Yep, one of those Titanium coated from Lenox. bastids are SHARPPPP.

 

[jbeckva]

Looks like we need this part number here for the resistors. Order.. many...

http://search.digikey.com/scripts/DkSea ... 100DECT-ND

Lee.. are ya up for "microsurgery"?? lol dunno man... I'll give 'er a shot. Haven't done this since Stu's A35 "lightshow mod".

 

[laatsch55]

Jer , it looks like the whole input buffer board is going. I'm gonna bypass it all together and go to the amp board. the gain problem is originating there, so it goes. New RCA, 2" shielded and Voila!
Joe's gonna go over it also and may recommend power supply replacement, so we are on hold for a week.

 

[jbeckva]

(does the happy banana dance!)

No SMT's.. ewwwwk!

Ok, so in the meantime I can go ahead and take the big 1/4 watts and "make em fit"?

 

[laatsch55]

Sure, don't need em on his project.

 

[speakerman1]

Guys I looked inside I couldn't even read the numbers. I Knew I was going to have to get one of those lighted magnifiers. Must be the age thing.

Larry