Skynyrd77's Thank Godamighty , Finally My Own WOPL Build Thread!!

I'll try to get a few snaps posted today for you Jason. Right now I am using it in the garage setup with no issues. Only thing I would probably recommend replacing is the original Pioneer phono cables at some point and the tone arm rest to a correct one which I had to use on the newer table. No biggie, can probably grab one for under $5 off AK or here
 
Got Jessica doing some weird stuff this morning!! Not sure if it's the tuner or pre or amp.. But with vol all the way down and pre on tuner or aux it is making my woofers thump . Not super hard.. But u can hear and see them move. With a thump sound???? I'm turning it off till I get some advise. Joe ,lee,nav,mike anybody have any idea
 
I would check your grounds... also maybe a bad IC connection between the components
 
Northwinds said:
I would check your grounds... also maybe a bad IC connection between the components
Click to expand...
Checked all that. It's weird. With the vol all the way down and it set to tuner. I can hear the tuner very low even if I turn vol up. Then if I switch pre to aux it stops and when I switch it back to tuner I can hear and use vol normal. But 50% of the time I'm gettin the woofer thump.
 
Skynyrd77 said:
Checked all that. It's weird. With the vol all the way down and it set to tuner. I can hear the tuner very low even if I turn vol up. Then if I switch pre to aux it stops and when I switch it back to tuner I can hear and use vol normal. But 50% of the time I'm gettin the woofer thump.
Click to expand...

Sounds like an issue with the preamp then Jason (IMO), Jessica should be fine
 
Northwinds said:
Sounds like an issue with the preamp then Jason (IMO), Jessica should be fine
Click to expand...
I pm'ed joe and asked him to look this over for me also. It is prob pre but I don't want to hurt anything so I better leave it off for now. Hey Steven time to bust out the 1250 for a pre lol!!! Lee has the 3800 to fix of mine but I got a feeling it's gonna be a bit on that!!
 
Skynyrd77 said:
I pm'ed joe and asked him to look this over for me also. It is prob pre but I don't want to hurt anything so I better leave it off for now. Hey Steven time to bust out the 1250 for a pre lol!!! Lee has the 3800 to fix of mine but I got a feeling it's gonna be a bit on that!!
Click to expand...

Does your 3800 have issues or is it in for a regular updating/cleaning? I was waiting to see the numbers off the AP after yours was worked on, to send mine in.
I'm sitting on another one deciding if I'll buy it to replace the cosmetically challenged face plate on the 3800 I have now.
 
fitz43 said:
Does your 3800 have issues or is it in for a regular updating/cleaning? I was waiting to see the numbers off the AP after yours was worked on, to send mine in.
I'm sitting on another one deciding if I'll buy it to replace the cosmetically challenged face plate on the 3800 I have now.
Click to expand...

The 3600 is what I currently use. The 3800 I just got and it has problems that's why I sent it to lee. The 3600 lee just completely redid. I can't wait to compare the phono stages on the 2
 
Hey Jason.
Can we bypass the preamp? Do you have a cd player with volume controls? If you do run it straight into Jessica .
Or if you still have the gain controls on Jessica you can use those as volume and the cd don't need um.

Or you could use the pre outs on the 1250 you have and run them into Jessica.

 
JustMike said:
Hey Jason.
Can we bypass the preamp? Do you have a cd player with volume controls? If you do run it straight into Jessica .
Or if you still have the gain controls on Jessica you can use those as volume and the cd don't need um.

Or you could use the pre outs on the 1250 you have and run them into Jessica.
Click to expand...

Yep I'm on it now mike. I'm tryin diff things. It's intermidiate that what sucks the worst. It did it last night. And stopped and 2 times today and stopped! I'm thinking pre. But wanna be sure. Shipping isn't cheap lol!! And whichever is broke will be headed to lee!
 
Well here's the latest. Thinking pre.
I had the pre off an the tuner off. My dac runs through the aux of pre. So I hooked up my computer to dac and turned on a song. With the dac on and pre off I was still hearing the music through my speakers. I turned on the pre and it stayed at the same volume till I moved the selector to phono. But as soon as I go back to aux you hear a faint pop and it's all fine again. Like the pre isn't amping the sound or some shit.
 
Skynyrd77 said:
Well here's the latest. Thinking pre.
I had the pre off an the tuner off. My dac runs through the aux of pre. So I hooked up my computer to dac and turned on a song. With the dac on and pre off I was still hearing the music through my speakers. I turned on the pre and it stayed at the same volume till I moved the selector to phono. But as soon as I go back to aux you hear a faint pop and it's all fine again. Like the pre isn't amping the sound or some shit.[/QUOTE

Yep, sounds like its in the preamp.
You could also but Bertha in line instead of Jessica. If its still there, you know its the preamp.
That is as long as Jessica doesn't get jealous:cwm21:
Click to expand...
 
It's Thursday so dance school day... But I just shut the pre off first and sure enough still low volume music. Change to tuner on pre no sound but switch it back to aux and low volume music again. So somehow it's getting through.... Bertha is at lees inline for a makeover...
 
Hi Jason
I agree this appears like a preamp problem. That is what I would be troubleshooting. Sounds like it is a PL 3600 you are using if I read your thread correctly. It is nice to have a passive preamp around to test with when you are chasing issues like this.

I agree with the recommendation to eliminate the pre if you have input sources with attenuation controls on their respective output levels. Sometimes you do not have that luxury at your disposal though.
 
I said just pull the plugs on the 1250 and use the tuner/pre to check.
 
Ok got the 1250 hooked up. Now when I turn it all on its fine. If I leave the amp on and shut of pre then I hear music for 5 to 10 sec then it goes away...
 
Gepetto said:
That is all normal...
Click to expand...

Cool sounds like it's the pre!!! Alright Bruce Leeroy hurry back.. I need a preamp !!!
thanks guys for the help once again. And a big thanks to Stephen for helpin out alldAy!!
and you were right! I guess I needed this 1250 eh!! Lol thanks guy's !
 
You must log in or register to reply here.
Back
Top