Skynyrd77's Thank Godamighty , Finally My Own WOPL Build Thread!!

[laatsch55]

The subject in question is under interrogation, not faring well either. Under only 8 ohm duress, it's story starts to change at 100hz, this is bad, way bad. I have changed out thge 5 amp rail fuses for 10 amp, time for a little water boarding....

 

[laatsch55]

This FR stinks... at 10 hz it is down 3-1/2 decibels......that means it is half as loud at 10 as it is at 100 hz. A typical WOPL it is only down . (yep that's POINT) .15 db, doubt if you could tell the difference from FLAT...

 

[laatsch55]

I ran a video hoping for some excitement, but no. Started to clip at 305 into 4 ohms. This puppy is sick. We'll try 8 ohms and see what happens...

 

[Elite-ist]

Lee: It appears you will have to really work this one to maintain the prestige of the Phase Linear WOPL moniker. Nice to see Jason get a deserving amp with all those good tunes he has been collecting.

Nando.

 

[laatsch55]

Yeah, shit Nando, the pressure is on..

 

[laatsch55]

Clips at 410 into 8...

 

[Elite-ist]

Like you've never seen or felt pressure in your life. You haven't broken, yet, and you seem to thrive on a challenge.

Nando.

 

[laatsch55]

Why thank you, Father...

 

[laatsch55]

Snag any prawns today??

 

[Elite-ist]

Blessed are those that are meek...and you need to get that amp in less-meek-mode. Meekness doesn't get you laid. And Jason needs an amp with cajones.

Nando.

 

[Elite-ist]

No prawns this week, Too busy at work.

Nando.

 

[laatsch55]

Oh, I thought you set traps and picked em up as you came home...

Ok, am now plugged in to the RACK power circuit, see what happens. The 14 gauge , 50 foot exrension cord was not getting it....

 

[Elite-ist]

True, but I don't work on Sunday, Monday.

Nando.

 

[laatsch55]

She's a hottie!! 106 on the rails, checcking for voltage sag while we take it up.....um....Joe anything you want to try in destruct mode??

 

[laatsch55]

True, but I don't work on Sunday, Monday.

Nando.

Ah....

 

[laatsch55]

Guys, Big power circuits make all the difference in the world. Clipped at 501 into 8 with rail voltage holding at 90.6....

 

[laatsch55]

Letting it cool before the 4 ohm test.....

 

[Gepetto]

She's a hottie!! 106 on the rails, checcking for voltage sag while we take it up.....um....Joe anything you want to try in destruct mode??

You are the destruction master Lee...

I just help clean up the mess with you afterwards

 

[laatsch55]

Blessed are those that are meek...and you need to get that amp in less-meek-mode. Meekness doesn't get you laid. And Jason needs an amp with cajones.

Nando.

Dayam!! I missed this post, most excellent Father...

 

[laatsch55]

You are the destruction master Lee...

I just help clean up the mess with you afterwards

Kinda like the guy in the corner of the boxing ring eh?? OK here we go...