Russ' 700B Wopl

Running the AC cord from the on/off switch changes things 30 microvolts is all.....
 

Attachments

  • Russ's Pics 029.jpg
    Russ's Pics 029.jpg
    78.5 KB · Views: 27
  • Russ's Pics 028.jpg
    Russ's Pics 028.jpg
    87.7 KB · Views: 33
Have you checked out Daqarta?
Lee I have that but the demo time was over before I got to use it. I have Arta 1.8.5

it is good for spectrum analysis and can generate sound but not as well as the Keithley.

I I guess I sould look at daqart again. I would like to do sweeps with a chart recorder like you do with the Audio Presision
 
Lee I have that but the demo time was over before I got to use it. I have Arta 1.8.5

it is good for spectrum analysis and can generate sound but not as well as the Keithley.

I I guess I sould look at daqart again. I would like to do sweeps with a chart recorder like you do with the Audio Presision


The AP is a godsend really, it takes a lot of work out of it.....


I paid 100.00 for Daqarta, have used it once, years ago. I still get updates, I think it's up to version 10.....
 
Moved the board away from the chassis....what a difference!!
 

Attachments

  • Russ's Pics 030.jpg
    Russ's Pics 030.jpg
    97.8 KB · Views: 55
  • Russ's Pics 031.jpg
    Russ's Pics 031.jpg
    80.1 KB · Views: 51
Moved the board away from the chassis....what a difference!!
What spacing does it start to settle down at. I have been lifting the board to about 1-3/4" off the chassis
 

Attachments

  • image.gif
    image.gif
    254.5 KB · Views: 45
  • image.gif
    image.gif
    263.6 KB · Views: 40
Right about where yours is Glen and that's just what I had in mind...
 
Anybody have a Mouser part number for the stand off you are using?
 
Fred, I uesd a 2" 6 X 32 screw and cut 3/4 off another standard PL standoff....
 
Anybody have a Mouser part number for the stand off you are using?
Hi Fred. I found these on eBay 1-1/2" search item #251759479387 I used them at this length in the 700
I have bought from this guy and I am going to order some things from him this week end

Glen
 
Last edited:
Got em Joe....
 

Attachments

  • 20160416_110840.jpg
    20160416_110840.jpg
    104.7 KB · Views: 28
Doing the E1 mod to Russ' WOPL....
 

Attachments

  • Russ' 700 pics.jpg
    Russ' 700 pics.jpg
    102.5 KB · Views: 26
Mod done...
 

Attachments

  • Russ' 700 pics 001.jpg
    Russ' 700 pics 001.jpg
    91.8 KB · Views: 27
  • Russ' 700 pics 002.jpg
    Russ' 700 pics 002.jpg
    95.7 KB · Views: 24
For some reason on this faceplate, probably due to overtightening of the meter hold down screws in the past, I couldn't get the meters snug. The hold down brackets ran to high in the pivot slot. Sooooooooo..........I formed a slight bend in the brackets.....
 

Attachments

  • Russ' 700 pics 003.jpg
    Russ' 700 pics 003.jpg
    83.4 KB · Views: 19
  • Russ' 700 pics 004.jpg
    Russ' 700 pics 004.jpg
    85.7 KB · Views: 17
  • Russ' 700 pics 005.jpg
    Russ' 700 pics 005.jpg
    77.2 KB · Views: 18
It's Joe's newest idea to deal with the uneven heating of Q1, Q2 on the low voltage section. PM your e-mail Glen....
 
Glen, with the new chassis we can standoff at least another 3/4"...

All over but the testing and shakedown....
 

Attachments

  • Russ' 700 pics 006.jpg
    Russ' 700 pics 006.jpg
    97.4 KB · Views: 18
  • Russ' 700 pics 007.jpg
    Russ' 700 pics 007.jpg
    96 KB · Views: 17
Back
Top