Replacement Lenses for the 700B

WOPL Sniffer

WOPL Sniffer

Veteran and General Yakker
#84
Joined
Aug 10, 2015
Messages
11,522
Location
Minnie-Soda
Tagline
Screw it
#84
I grabbed some black ones too since I have a black faceplate left. I didn't care for the white slot in them but I may fix that.

Black knob.jpg
 
laatsch55

laatsch55

Administrator,
Staff member
#85
Joined
Jan 14, 2011
Messages
74,912
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#85
I think the indicator serves a purpose and could save some speakers if you have them backed off a ways and the cat rubs on them to full volume......ya just never know....
 
Phase Linear Phanatic

Phase Linear Phanatic

Chief Journeyman
#88
Joined
May 26, 2013
Messages
713
Location
St. Louis, MO.
Tagline
Born and Raised In The 700 Watt Club.
#88
I realize this is an old topic; but are there still any inserts left laying around? I only now have just gotten to the point where I can tackle replacing mine. I'd be wanting the 700 watts version of course. I see the Lab Standard wasn't made. I guess if I wanted to re-use the Lab Standard ones I have......how difficult is it to take the old ones out? Are they glued down? I'm not hip on ruining originals. :) I am attempting to put new ones in some new faceplates I've had for quite a while.
 
Last edited:
WOPL Sniffer

WOPL Sniffer

Veteran and General Yakker
#93
Joined
Aug 10, 2015
Messages
11,522
Location
Minnie-Soda
Tagline
Screw it
#93
After the move back here to Arizona, the inserts were packed and I was so busy I kinda forgot about them. I guess I should check how many I have left. Not many WOPL's, but plenty of stock inserts for sure. Thanks guys...

Perry
 
WOPL Sniffer

WOPL Sniffer

Veteran and General Yakker
#94
Joined
Aug 10, 2015
Messages
11,522
Location
Minnie-Soda
Tagline
Screw it
#94
Phase Linear Phanatic said:
I realize this is an old topic; but are there still any inserts left laying around? I only now have just gotten to the point where I can tackle replacing mine. I'd be wanting the 700 watts version of course. I see the Lab Standard wasn't made. I guess if I wanted to re-use the Lab Standard ones I have......how difficult is it to take the old ones out? Are they glued down? I'm not hip on ruining originals. :) I am attempting to put new ones in some new faceplates I've had for quite a while.
Click to expand...
Replacing is easy as pie, I had done a poll seeing what was wanted and the "Lab Standard" didn't get a mention so I had the stock and "WOPL" inserts made. They may be taped, or RTV'd in and some just held in by the meter bezel's. But most are scratched or beat up and Don't look good when installed on your new faceplates. Glad you are able to get back to your project's.

Perry
 
Phase Linear Phanatic

Phase Linear Phanatic

Chief Journeyman
#95
Joined
May 26, 2013
Messages
713
Location
St. Louis, MO.
Tagline
Born and Raised In The 700 Watt Club.
#95
TheWOPLwhiffer said:
Replacing is easy as pie, I had done a poll seeing what was wanted and the "Lab Standard" didn't get a mention so I had the stock and "WOPL" inserts made. They may be taped, or RTV'd in and some just held in by the meter bezel's. But most are scratched or beat up and Don't look good when installed on your new faceplates. Glad you are able to get back to your project's.

Perry
Click to expand...
Yeah I probably would have been the only one who would have asked for that since all four of my amps are Lab Standards. But the original 700 watts RMS are just as good. I agree. Mine are in excellent condition unlike most you have probably seen. Only because I paid a high price for them in that condition over the years. Even still, I'd rather leave them be in their original plates. So I will take four of the originals.

PM sent with payment. Thanks Perry!
 
Last edited:
buildingnut

buildingnut

Journeyman
#98
Joined
Dec 17, 2014
Messages
71
Tagline
---
#98
Lenses

If anyone has 3 of the WOPL 1000 lenses and the paper as well I would be willing to buy them. I messaged Perry and got no response. If you should happen to have any let me know. Thank you!
Trevor
 
laatsch55

laatsch55

Administrator,
Staff member
#99
Joined
Jan 14, 2011
Messages
74,912
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#99
That doesn't sound like Perry Trevor. PM him agsin....I have some if he's out...
 
You must log in or register to reply here.
Top