Przem's Phase Linear 700 Series II White Oak Conversion

Well, that's really the only place I can shoehorn in the IEC socket. Surely you have another source for the fan??
 
OK, is the aux socket 240 or 120?? If it's 240 in that's usually what the aux socket is too unless you run a ground and one leg of the 240 and that's not how this one was wired...
 
It appears it has an additional winding on the transformer, or a dual primary where you could tap 120. Did you have 120 at the aux socket?
 
I see an additional wire in the windings, so yeah it looks like 120 is possible. I'll have to wire nut some things and plug it in and check it out...
 
P.L.F. said:
Lee, if you started drilling, could we swap the AUX 110VAC socket below, somewhere next to the AC fuse holder? Or indeed put the IEC socket aside next to transformer? Sorry for late reaction...
Click to expand...

Looks like a painted chassis...
 
Przem, We can change the type of plug used on the fan and come out the OLD AC mains in hole....I'll send the male part of the connector we use so you can convert the fan cord....OK?
 
Going to Timdalf's for dinner , drinkls and fire works....later, I'll be on my phone though..
 
You must log in or register to reply here.
Back
Top