NEW BUILD, with a NICE Surprise WOAD delivers

WOPL Sniffer

Veteran and General Yakker
Joined
Aug 10, 2015
Messages
11,522
Location
Minnie-Soda
Tagline
Screw it
#70
Si........ Hope she sounds purdy too, just like all her previous sisters and brothers.
 
Last edited:

mlucitt

Veteran and General Yakker
Joined
Jun 24, 2011
Messages
3,469
Location
Jacksonville, FL
#71
That is like a NASCAR stock car. Stock - except every part has been replaced by the latest and greatest technology has to offer (not including the transformer, chassis, and meters). Geez, I want one of those, maybe in Phase II format.
 

WOPL Sniffer

Veteran and General Yakker
Joined
Aug 10, 2015
Messages
11,522
Location
Minnie-Soda
Tagline
Screw it
#72
Here is a couple pics of some tests. These are numbers at 100WPC. Unweighted, both channels driven, 1Khz Tone

Crosstalk
THD+N


IMG_5539rs (2208 x 1656).jpg IMG_5538rs (2208 x 1656).jpg IMG_5537rs (2208 x 1656).jpg IMG_5536rs (2208 x 1656).jpg
 

VSAT88

Veteran and General Yakker
Joined
Sep 7, 2017
Messages
1,842
Location
Phenix City Alabama
Tagline
Like my BlueTooth ?
#76
Didn't PL originally use small white zip-ties? I think the black ones were not available in the 1970's.

I want to try Sniffer's awesome wiring technique using black nylon lacing (I learned how to do that in the '80's at Naval Sea Support Center, Pacific - NAVSEACENPAC), by an old guy who told me that was the only way he learned to dress wiring because zip-ties had not yet been invented.

The benefits are that the nylon lace never breaks, the cut ends don't fly off and have to be discarded, the remaining sharp ends won't shred your fingers, and it looks cool if done right.
If I have room some of the time I will twist the tie wrap off instead of cutting it. No sharp edges. Perry that amp looks great ! Brad you are gonn be stoked !
 

oldphaser

Chief Journeyman
Joined
Sep 8, 2012
Messages
848
#80
Thanks Jer. I'll let you know. I have Fat Girl sitting here so I'll do a WOPL baseline and then stick the G1 in there. I'll attack that next week.
I would love to see the THD+N numbers at 20kHz both channels driven (at the same time) at rated output 360 watts per channel (53.66V) into 8 ohms. BW limited to 80kHz on your analyzer.

Ed
 
Top