Johan's Phase Linear 700B Fully Comp Conversion

That sounds good to me, and I don't give up that easy Johan, I once went through 3 boards in Gisonians 700......I will make it right.....
 
johan1212 said:
ok...lets just check it....want me to check the caps etc on the board?...only have a esr meter....so not very sophisticated stuff...and am not an expert at all...can go to caps...offset....bias...but thats it...and deox pots....and very good detail cleaning....lol...I dont think its a bad cap or something....it would be much worst sound...if you tell me everything is ok after checking it,I ll just put it on ebay one day and we ll start fresh with another one...no problem...no rush....just let me know when ok for you....am out of the country all month of July...
Click to expand...

Instead of eBay, maybe offer it here???
 
AND, I could have wounded it testing, been known to do that....but when that happens it's usually not that subtle. Just fixed a 400 full comp that had 3 bad resistors in it and it sounded like SHIT....
 
Last edited:
deox full blast on the pot....works.....

i would never say my 700 sounds like shit....but doesnt sound like an upgrade...take care....thanks
 
was that pic the other day lee that you posted of the k's in the living room with the hardwood floors your k's???
 
Nop, those were Kev's over at Timdalf's, these are mine...
 

Attachments

  • SAM_0155.jpg
    SAM_0155.jpg
    85.8 KB · Views: 38
  • SAM_0154.jpg
    SAM_0154.jpg
    94 KB · Views: 37
  • SAM_0153.jpg
    SAM_0153.jpg
    94.5 KB · Views: 38
nice... them others were as big as my livingroom lmfao
id say you got plenty of equipment also
 
Here's my super modded cerwin dx-7's.they have a cerwin woofer but that's it and cabs.
image.jpg
 

Attachments

  • image.jpg
    image.jpg
    97.9 KB · Views: 26
  • image.jpg
    image.jpg
    96.8 KB · Views: 19
220V....

hi Lee,

question from a customer who might be interested in a modified 700B....can the transformer be rewired to receive 220V input or is an external one the only option?...I know the Accuphase have like a wiring connectors bar and different options for different voltages....thanks
 
Pl ran some amps with dual voltage. If not, 120 is the only option, other than a custom outboard power supply. I shouldn't say only option, I'm sure Schumcher could wind ya one...
 
Just got the case. I'll get this 700 packed up and run it to fedex. So it will be on its way tonight!! Thanks lee
 
You must log in or register to reply here.
Back
Top