Derek92994's 700 Ser II White Oak conversion

Skratch

Skratch

Chief Journeyman
#2,102
Joined
Dec 27, 2011
Messages
1,131
Location
Huntley Il.
Tagline
Life is short, so take your time
#2,102
Is C2 capacitor on the B- supply? I don't have a schematic of that rev backplane but on a 400 C2 is on the B- rail
 
derek92994

derek92994

Veteran and General Yakker
#2,104
Joined
May 1, 2013
Messages
7,163
Location
Australia
Tagline
Those who enter the man cave will get WOPLed
#2,104
Will bring it up on variac and dcp one more time to be sure. Then set bias and hook up to spare speakers, will let it idle.
 
derek92994

derek92994

Veteran and General Yakker
#2,106
Joined
May 1, 2013
Messages
7,163
Location
Australia
Tagline
Those who enter the man cave will get WOPLed
#2,106
Do you think that capacitor was the problem from the start? Responsible for blowing the 2 outputs on those 2 separate occasions?
 
laatsch55

laatsch55

Administrator,
Staff member
#2,107
Joined
Jan 14, 2011
Messages
74,244
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#2,107
The original "pop" and smell may have been it Darc. Had one do that to me but didn't blow an output, just the fuse, so...I really don't know...
 
derek92994

derek92994

Veteran and General Yakker
#2,109
Joined
May 1, 2013
Messages
7,163
Location
Australia
Tagline
Those who enter the man cave will get WOPLed
#2,109
Dc offset 0.4mv left and 1.0mv right

what is the low level ac? Main caps are at 101v dc
 
derek92994

derek92994

Veteran and General Yakker
#2,110
Joined
May 1, 2013
Messages
7,163
Location
Australia
Tagline
Those who enter the man cave will get WOPLed
#2,110
On the driver board, why is Q6R running at 130F and Q6L running at 100F? All the other temperatures are consistent.
 
You must log in or register to reply here.
Top