Derek92994's 700 Ser II White Oak conversion

[laatsch55]

The strap has to go under the shell to keep it...

 

[pennysdad]

Check all the transformer wires for melt. It looks like BD got into some of the wires with the soldering iron.

Yes I did…. Sorry about that D2. It was just the one I think, and not that bad.
I should've put some heat shrink on it myself, but [as usual], just wasn't thinking.

On a positive side….. Welcome to the Club D2. It was meant to be.

To [almost] everyone at Phoenix, [especially those that aren't planning on killing anything in the near future], I wish you a very Happy Xmas, and the best for the coming New Year...

<script type="text/javascript" src="safari-extension://com.ebay.safari.myebaymanager-QYHMMGCMJR/6f136b72/background/helpers/prefilterHelper.js"></script>

 

[laatsch55]

You too BD!! And Happy New Year!!

 

[laatsch55]

Nice of you to post BD!!

 

[laatsch55]

Correction D2. The strap goes bewtee the chassis and the shell. That's why the shell is relieved on the flat...

 

[Elite-ist]

Season's greetings to you, George. Merry Christmas and Happy New Year 2015! Nice to have you, here.

Nando.

 

[pennysdad]

Nice of you to post BD!!

It's the 'most' I can do Lee…..
Thanks awesomely for doing this for D2 BTW. You're a true hero in my books. <script type="text/javascript" src="safari-extension://com.ebay.safari.myebaymanager-QYHMMGCMJR/6f136b72/background/helpers/prefilterHelper.js"></script>

 

[laatsch55]

He's a good kid BD, deserves every bit of it!!

 

[pennysdad]

Season's greetings to you, George. Merry Christmas and Happy New Year 2015! Nice to have you, here.

Nando.

…. and especially to you too Nando. <script type="text/javascript" src="safari-extension://com.ebay.safari.myebaymanager-QYHMMGCMJR/6f136b72/background/helpers/prefilterHelper.js"></script>

 

[derek92994]

Thanks so much BD, it means the world to me.

Now I just gotta fish this bolt out so the transformer mounts properly.

 

[pennysdad]

… and to Nav too! Wherever he is right now. <script type="text/javascript" src="safari-extension://com.ebay.safari.myebaymanager-QYHMMGCMJR/6f136b72/background/helpers/prefilterHelper.js"></script>

 

[pennysdad]

Thanks so much BD, it means the world to me.

Now I just gotta fish this bolt out so the transformer mounts properly.

A 16lb sledgehammer can fix that!<script type="text/javascript" src="safari-extension://com.ebay.safari.myebaymanager-QYHMMGCMJR/6f136b72/background/helpers/prefilterHelper.js"></script>

 

[derek92994]

Just fishing out my socket set to tighten these uranium tranny bolts properly

 

[laatsch55]

DEPLETED uranium bolts...get it right!!

 

[NavLinear]

Keep this in mind whilst working on your amp:

 

[derek92994]

Transformer in, bridge rectifier screwed back in.

 

[laatsch55]

Transformer tight??

 

[derek92994]

Transformer tight??

As tight as can be without stripping the bolts.

 

[laatsch55]

Ok, Perfect. Now.....the large white chassis wire on the terminal strip is #1, the next blank hole is #2, the big blue wire #3 and so on. K??

 

[derek92994]

Ok, Perfect. Now.....the large white chassis wire on the terminal strip is #1, the next blank hole is #2, the big blue wire #3 and so on. K??

This part here? Heading closest to me and moving towards the back?