Derek92994's 700 Ser II White Oak conversion

laatsch55 said:
Check all the transformer wires for melt. It looks like BD got into some of the wires with the soldering iron.
Click to expand...

Yes I did…. Sorry about that D2. It was just the one I think, and not that bad. :(
I should've put some heat shrink on it myself, but [as usual], just wasn't thinking.

On a positive side….. Welcome to the Club D2. It was meant to be. ;)

To [almost] everyone at Phoenix, [especially those that aren't planning on killing anything in the near future], I wish you a very Happy Xmas, and the best for the coming New Year...

:santa:<script type="text/javascript" src="safari-extension://com.ebay.safari.myebaymanager-QYHMMGCMJR/6f136b72/background/helpers/prefilterHelper.js"></script>
 
Correction D2. The strap goes bewtee the chassis and the shell. That's why the shell is relieved on the flat...
 
Season's greetings to you, George. Merry Christmas and Happy New Year 2015! Nice to have you, here.

Nando.
 
laatsch55 said:
Nice of you to post BD!!
Click to expand...

It's the 'most' I can do Lee…..
Thanks awesomely for doing this for D2 BTW. You're a true hero in my books. :blob8:<script type="text/javascript" src="safari-extension://com.ebay.safari.myebaymanager-QYHMMGCMJR/6f136b72/background/helpers/prefilterHelper.js"></script>
 
Elite-ist said:
Season's greetings to you, George. Merry Christmas and Happy New Year 2015! Nice to have you, here.

Nando.
Click to expand...

…. and especially to you too Nando. :happy3:<script type="text/javascript" src="safari-extension://com.ebay.safari.myebaymanager-QYHMMGCMJR/6f136b72/background/helpers/prefilterHelper.js"></script>
 
Thanks so much BD, it means the world to me.

Now I just gotta fish this bolt out so the transformer mounts properly.

 
… and to Nav too! Wherever he is right now. ;-)<script type="text/javascript" src="safari-extension://com.ebay.safari.myebaymanager-QYHMMGCMJR/6f136b72/background/helpers/prefilterHelper.js"></script>
 
derek92994 said:
Thanks so much BD, it means the world to me.

Now I just gotta fish this bolt out so the transformer mounts properly.
Click to expand...

A 16lb sledgehammer can fix that!<script type="text/javascript" src="safari-extension://com.ebay.safari.myebaymanager-QYHMMGCMJR/6f136b72/background/helpers/prefilterHelper.js"></script>
 
Just fishing out my socket set to tighten these uranium tranny bolts properly
 
Keep this in mind whilst working on your amp:
 

Attachments

  • slap.jpg
    slap.jpg
    23.6 KB · Views: 21
Transformer in, bridge rectifier screwed back in.

 
Ok, Perfect. Now.....the large white chassis wire on the terminal strip is #1, the next blank hole is #2, the big blue wire #3 and so on. K??
 
laatsch55 said:
Ok, Perfect. Now.....the large white chassis wire on the terminal strip is #1, the next blank hole is #2, the big blue wire #3 and so on. K??
Click to expand...

This part here? Heading closest to me and moving towards the back?

 
You must log in or register to reply here.
Back
Top