Derek92994's 700 Ser II White Oak conversion

THD & N Left channel..
 

Attachments

  • D2's 700---THD & N Left, Graph.jpg
    D2's 700---THD & N Left, Graph.jpg
    86.3 KB · Views: 24
  • D2's 700---THD & N Left, Table.jpg
    D2's 700---THD & N Left, Table.jpg
    98.5 KB · Views: 22
THD & N right channel...
 

Attachments

  • D2's 700---THD & N Right, graph.jpg
    D2's 700---THD & N Right, graph.jpg
    88.7 KB · Views: 22
  • D2's 700---THD & N Right, Table.jpg
    D2's 700---THD & N Right, Table.jpg
    98.3 KB · Views: 21
We've had hail here the size of Tennis Balls. That one we had wasn't far off. Lots of damage and insurance companies.
 
Max out with a 700VA power supply was 396 WPC into 8 ohms....both loaded and driven...1% distortion...
 
Considering the rail voltage generated by other SerII's I'm guessing you'll be over 510WPC into 8 ohms, 775 wpc into 4 ohms...
 
Had to let it cool down after the max out and a couple other things I was doing....now to the last round of measurements.....



Mach 8 with THD & N measurements going on is NOT a good Idea......I had the K's rompin just to see if it would affect it....and yep it does..
 
Tons.........Finishing ---Prometheus-----"Spike" Mach 8 before we finish....
 
Whooops....didn't have the fans on.....the loaner 700B tripped the thermoswitch.....
 
Other Measurements....Killer Signal-to-Noise....
 

Attachments

  • D2's 700---Other Measurements.jpg
    D2's 700---Other Measurements.jpg
    82.1 KB · Views: 335
She's a good one D2.....I'll get er buttoned back up. I have a box ready to go. As soon as the 4 caps for 998vin get here I'll get it on the way...
 
laatsch55 said:
She's a good one D2.....I'll get er buttoned back up. I have a box ready to go. As soon as the 4 caps for 998vin get here I'll get it on the way...
Click to expand...

Sweet! Its going to be a great christmas, thank you so much Lee.
 
Wow, Derek, you will be in 7th Heaven when your PL makes it home.

Nando.
 
You must log in or register to reply here.
Back
Top