Derek92994's 700 Ser II White Oak conversion

THD & N Left channel..
 

Attachments

  • D2's 700---THD & N Left, Graph.jpg
    D2's 700---THD & N Left, Graph.jpg
    86.3 KB · Views: 24
  • D2's 700---THD & N Left, Table.jpg
    D2's 700---THD & N Left, Table.jpg
    98.5 KB · Views: 22
THD & N right channel...
 

Attachments

  • D2's 700---THD & N Right, graph.jpg
    D2's 700---THD & N Right, graph.jpg
    88.7 KB · Views: 22
  • D2's 700---THD & N Right, Table.jpg
    D2's 700---THD & N Right, Table.jpg
    98.3 KB · Views: 21
We've had hail here the size of Tennis Balls. That one we had wasn't far off. Lots of damage and insurance companies.
 
Max out with a 700VA power supply was 396 WPC into 8 ohms....both loaded and driven...1% distortion...
 
Considering the rail voltage generated by other SerII's I'm guessing you'll be over 510WPC into 8 ohms, 775 wpc into 4 ohms...
 
Had to let it cool down after the max out and a couple other things I was doing....now to the last round of measurements.....



Mach 8 with THD & N measurements going on is NOT a good Idea......I had the K's rompin just to see if it would affect it....and yep it does..
 
Tons.........Finishing ---Prometheus-----"Spike" Mach 8 before we finish....
 
Whooops....didn't have the fans on.....the loaner 700B tripped the thermoswitch.....
 
Other Measurements....Killer Signal-to-Noise....
 

Attachments

  • D2's 700---Other Measurements.jpg
    D2's 700---Other Measurements.jpg
    82.1 KB · Views: 335
She's a good one D2.....I'll get er buttoned back up. I have a box ready to go. As soon as the 4 caps for 998vin get here I'll get it on the way...
 
laatsch55 said:
She's a good one D2.....I'll get er buttoned back up. I have a box ready to go. As soon as the 4 caps for 998vin get here I'll get it on the way...
Click to expand...

Sweet! Its going to be a great christmas, thank you so much Lee.
 
You must log in or register to reply here.
Back
Top