400/1 “Linda” Full WOPL

AngrySailor

Veteran and General Yakker
Joined
Oct 15, 2014
Messages
3,419
Tagline
---not quite right
#3
For sure. Tim could use one or two changed out also. Unfortunately there are several broken insulators on Linda, where they pass through the back plane. I won’t toss anything though Lee.
 

AngrySailor

Veteran and General Yakker
Joined
Oct 15, 2014
Messages
3,419
Tagline
---not quite right
#7
If they're busted they're too brittle..
Did they bust because brittle or because someone was a caveman putting them output retainer screws in? I notice you have to be careful as the screw goes through the insulator that it’s threads enter the collector tab easily or you would probably bust the insulator?
 

George S.

Veteran and General Yakker
Joined
Feb 18, 2020
Messages
4,590
#9
Mine looked like they pushed the socket away from the wall trying to get the screw started, then once started, snugged it up with a misaligned socket. Probably couldn't see through all that compound they slopped on.
 
Last edited:

AngrySailor

Veteran and General Yakker
Joined
Oct 15, 2014
Messages
3,419
Tagline
---not quite right
#11
Mine looked like they pushed the socket away from the wall trying to the screw started, then once started, snugged it up with a misaligned socket. Probably couldn't see through all that compound they slopped on.
That friggin compound... I’ll have nightmares about that slop...
 

AngrySailor

Veteran and General Yakker
Joined
Oct 15, 2014
Messages
3,419
Tagline
---not quite right
#14
Btw Mark, never knew you had a YouTube channel, I got videos to watch tonight, looks real cool what I’ve seen.
 
Top