David's Phase Linear 700B Thread

[laatsch55]

I'm not sure if the through holes could take that gauge.


They wil if ya really, really need em to....

 

[Phase Linear Phanatic]

Sounds like the perfect care package Lee. Let me know Jerry if you need anything else. Lee, PM me with your tally when you get squared with Jerry. Thanks guys!!

 

[laatsch55]

Don't know if there will be enough to tally.

 

[laatsch55]

You'
ll have something I just can't live without someday...

 

[laatsch55]

And if ya die before we can square up I will hunt you down in the afterlife and collect....

 

[NavLinear]

I'm not sure if the through holes could take that gauge.


They wil if ya really, really need em to....

The old putting something too big in a small hole syndrome.

 

[laatsch55]

Happens to me a lot Dennis...

 

[NavLinear]

I'm not going to ask.

 

[laatsch55]

We're always trying to put anchors, packers, bridge plugs, cement retainers, etc in too small of holes...

 

[Phase Linear Phanatic]

You'
ll have something I just can't live without someday...

I bet if I saw a decade or two into the future; I'd see you collecting my speakers. Lol!............

 

[NavLinear]

I bet if I saw a decade or two into the future; I'd see you collecting my speakers. Lol!............

I'll help carry them.

 

[Phase Linear Phanatic]

20 AWG worked for me - if the board is pulled from the mounting standoffs and you want to fold it back the 18 gauge could be a bit stiff and I'm not sure if the through holes could take that gauge.

Thats probably where the optional phoenix contacts would have come into play when i bought the board. Might have granted us a bigger guage. But i went the solder route. Funny. Them being called phoenix contacts? Fits with the forum. Usually at work we stock two types of terminal blocks. Standard allen bradley J blocks, or phoenix contacts. After that, its ABB or a customer supplied type. I had no clue when i got into this PL thing, how close to work this would be. Lol! Perhaps doing this all week, and then finding tine do MORE of it on my day off is where i run into loss of fun. If i was like joe, this would be fun every day, 24/7 huh? Lol.

 

[Phase Linear Phanatic]

I'll help carry them.

ohhhhhh good luck with that. Can you bench press 350 lbs? I once saw a moving guy strap my dads concert grand on his back with just his knuckles and a furniture strap. But that's at half the weight of mine. Unless you are 6 foot nine, 250 lbs, then i apologize.

 

[NavLinear]

Thats probably where the optional phoenix contacts would have come into play when i bought the board. Might have granted us a bigger guage. But i went the solder route. Funny. Them being called phoenix contacts? Fits with the forum. Usually at work we stock two types of terminal blocks. Standard allen bradley J blocks, or phoenix contacts. After that, its ABB or a customer supplied type. I had no clue when i got into this PL thing, how close to work this would be. Lol! Perhaps doing this all week, and then finding tine do MORE of it on my day off is where i run into loss of fun. If i was like joe, this would be fun every day, 24/7 huh? Lol.

You don't need big wire for the interconnect to the controller board. I would have used 24AWG but since the board could be folded back I wanted something a little more substantial as you don't want wires to break - hence the 20AWG. The gauge of the wire also fills up more of the hole - therefore satisfying the board. It seems to me that the cleanest way to assemble this is a direct wire soldered to the board (IMHO) - unless it was a prototype that you'd be pulling out multiple times.

 

[laatsch55]

Yep.

 

[laatsch55]

I'm only 6'6" and 240.

 

[NavLinear]

My wife says our 15 year old granddaughter is my height now but I disagree as I think she's shorter. She's 6'2" now and I hope she is done growing.

 

[laatsch55]

Pray for 6 more inches on that gal. She could be the first white girl to dunk in the WNBA!!!

 

[laatsch55]

I bet if I saw a decade or two into the future; I'd see you collecting my speakers. Lol!............

I'm pretty happy with my Super K's. I do need another bass bin on top though.

 

[laatsch55]

Thats probably where the optional phoenix contacts would have come into play when i bought the board. Might have granted us a bigger guage. But i went the solder route. Funny. Them being called phoenix contacts? Fits with the forum. Usually at work we stock two types of terminal blocks. Standard allen bradley J blocks, or phoenix contacts. After that, its ABB or a customer supplied type. I had no clue when i got into this PL thing, how close to work this would be. Lol! Perhaps doing this all week, and then finding tine do MORE of it on my day off is where i run into loss of fun. If i was like joe, this would be fun every day, 24/7 huh? Lol.

You wouldn't want his day job....