- Joined
- Jan 14, 2011
- Messages
- 74,917
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
So, here I go. Phase Linear 400
- Thread starter VSAT88
- Start date
You could always post some more pictures of your stuff. I like to see what other members have, or just a look at their shop/garage/basement etc. Lots of very cool folks here & pics help to know each other better I think.
Every month I budget a bunch of dough to send to Gepetto & every month has brought another surprise major expense. Just had to replace my rider mower this month. To use one time & put away for the winter! Also two days ago my 99 Deville broke down & I think I'll put it out to pasture. I like my 77 Coupe Deville better anyhow.
But I'll be White Oaking soon even if I have to sell the wifes handicap van.
Every month I budget a bunch of dough to send to Gepetto & every month has brought another surprise major expense. Just had to replace my rider mower this month. To use one time & put away for the winter! Also two days ago my 99 Deville broke down & I think I'll put it out to pasture. I like my 77 Coupe Deville better anyhow.
But I'll be White Oaking soon even if I have to sell the wifes handicap van.
- Joined
- Jan 14, 2011
- Messages
- 74,917
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
Here's a 700b listed on Audio Karma. Not the best price ever. But better than the prices on Ebay right now;
http://audiokarma.org/forums/index.php?threads/phase-linear-700b.791823/
http://audiokarma.org/forums/index.php?threads/phase-linear-700b.791823/
That one on ebay had a crap faceplate & no meter bezels. Nice cosmetics cost more. If you don't care what it looks like, some go for less. White Oak has new faceplates & even improved chassis. But again, looks cost.
Every one listed on the bay has the same devoted group watching & bidding. The market is there for sure. I'm way too rural to have a chance of finding used gear in resale or stereo shops.
Every one listed on the bay has the same devoted group watching & bidding. The market is there for sure. I'm way too rural to have a chance of finding used gear in resale or stereo shops.
40.00 skins they want for the heat sensor Elmwood 2455R that sits between the heat sinks on the back wall behind the driver board. Any suggestions ? Another compatible part # that works ? Do I have to have it ? My power cord was kinda shoddy so I decided to change it out before much play. Guess I am glad I did. As soon as I hit it with a bit of heat the lead broke right off. Thanks.
- Joined
- Jan 14, 2011
- Messages
- 74,917
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
Saw it on eBay no farther research. I was able to quite successfully solder the AC lead back in place with what was left after the tab broke loose. Still curious as to what to do if I needed to.
https://www.ebay.com/p/1-PC-of-2455R-Elmwood-Thermostat-Sensor-Switch/832683437?iid=202070713512
https://www.ebay.com/p/1-PC-of-2455R-Elmwood-Thermostat-Sensor-Switch/832683437?iid=202070713512
Ran it all last week in the shop and I had no problems with it at all so I took it in to my office and hooked it up to a little tube pre and out to a pair of Polk Monitor 7's and it will rock I mean ROCK ! I was really glad to see that I had plenty of room to solder that AC wire back on that thermostat, thought that might be an unobtainium part. Oh, (edit) I have a fan set up I am playing with the idea of building for it as well. Two server fans 12 V.
Check out my 700B WOPL build thread, it covers the thermal switch.
Make sure the replacement is Normally closed and the correct temperature (I believe 80 degrees C).
think this is what I ended up with, I have a few sets with different temperature ratings on my bench, but I seem to remember 70C is what I settled on.
https://www.amazon.com/gp/product/B008MU1WOS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Make sure the replacement is Normally closed and the correct temperature (I believe 80 degrees C).
think this is what I ended up with, I have a few sets with different temperature ratings on my bench, but I seem to remember 70C is what I settled on.
https://www.amazon.com/gp/product/B008MU1WOS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Last edited:
