700/B/Ser II Transformers

WOPL Sniffer

WOPL Sniffer

Veteran and General Yakker
#1
Joined
Aug 10, 2015
Messages
11,522
Location
Minnie-Soda
Tagline
Screw it
#1
Anybody know the Specs on the 700B/Ser II transformers? If a guy wanted to find a replacement (does NOT have to be the same form factor i.e... Torroid can be used) that will do the same job??? Secondary meter output is not necessary but would be cool. Any Ideas?
 
Northwinds

Northwinds

Veteran and General Yakker
#2
Joined
Mar 18, 2013
Messages
7,562
Location
Coventry, CT
Tagline
Fondler errrr... fan of all Nav's avatars
#2
I'd say Ed would have the answer to that question. I wondered the same thing in the past if you have one that is buzzing or dead. If you still have Bob Carver's auction link, you might ask him also. Lets just hope he does not tell you they are adamantine though LOL. I think you would have to find one in the 600-700VAC range though right? A 600VAC one will give you 350wpc from what I am reading
 
laatsch55

laatsch55

Administrator,
Staff member
#3
Joined
Jan 14, 2011
Messages
74,948
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#3
Get a couple 1000 volt/amp toroids with 120 volt primaries and a ceter tapped 162 volt secondary. Rectified voltage should be +,-, 113vdc...
 
WOPL Sniffer

WOPL Sniffer

Veteran and General Yakker
#4
Joined
Aug 10, 2015
Messages
11,522
Location
Minnie-Soda
Tagline
Screw it
#4
laatsch55 said:
Get a couple 1000 volt/amp toroids with 120 volt primaries and a ceter tapped 162 volt secondary. Rectified voltage should be +,-, 113vdc...
Click to expand...
Thanks Lee, I only had some tranny's made of kryptonite with vaporlock secondary's...... I used them to make a million watt amp built in a band aid box..... Made the speakers from reinforced Cracker Jack boxes with 25" woffers.....
 
WOPL Sniffer

WOPL Sniffer

Veteran and General Yakker
#5
Joined
Aug 10, 2015
Messages
11,522
Location
Minnie-Soda
Tagline
Screw it
#5
get a couple? What, one for each channel?? Naw, should be just one for both channels like the tranny's we use now right???
 
laatsch55

laatsch55

Administrator,
Staff member
#6
Joined
Jan 14, 2011
Messages
74,948
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#6
Joe and I discussed this years ago and I think, THINK, they are 1.5kva, so a couple would be good. Have separate caps and rectifier , then parallel AFTER the rectifier. The 700 should double down into 4 ohms, but can't, runs outta gas....
 
laatsch55

laatsch55

Administrator,
Staff member
#7
Joined
Jan 14, 2011
Messages
74,948
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#7
I'm sure you can get whtever size toroid you wanted, found 4 pretty cheap a couple yerars ago for the monster monos, gonna have to build those one of these days. Check Apex jr.com
 
WOPL Sniffer

WOPL Sniffer

Veteran and General Yakker
#8
Joined
Aug 10, 2015
Messages
11,522
Location
Minnie-Soda
Tagline
Screw it
#8
Yeah, been wanting to build a HUGE monster amp. Just for shits and grins. I been looking at skizmo's on the net but you know how that goes. Probably sound like the guy from Tull in the first part of Aqualung.... I would hate to use a layout just to find out it sucks. I'm not an engineer but I did stay at a flea-bag the other night..... Gotta be analog. Tubes in my book are over rated. They sure look cool though. Hell, maybe with the leftover lights from decorating the tree I can just spruce up a WOPL....
 
Northwinds

Northwinds

Veteran and General Yakker
#10
Joined
Mar 18, 2013
Messages
7,562
Location
Coventry, CT
Tagline
Fondler errrr... fan of all Nav's avatars
#10
laatsch55 said:
Joe and I discussed this years ago and I think, THINK, they are 1.5kva, so a couple would be good. Have separate caps and rectifier , then parallel AFTER the rectifier. The 700 should double down into 4 ohms, but can't, runs outta gas....
Click to expand...
Just what the doctor ordered!!!
 
laatsch55

laatsch55

Administrator,
Staff member
#12
Joined
Jan 14, 2011
Messages
74,948
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#12
Nope, standard chassis for each channel with an outboard power supply for each one...4 enclosures...
 
grapplesaw

grapplesaw

Veteran and General Yakker
#13
Joined
Aug 13, 2014
Messages
2,778
Location
Vancouver
Tagline
---
#13
Perry if 850 watts or so at 8ohms is enough for your needs I have some control boards the convert a phase linear into doubled output in mono. Two boards one in each of two PL amps give you 859-900 watts each channel. So you can use both as a stereo or mono. I have some boards. This is the same set up as your buddy Bob put in the Carver c-500. Pm me if want more info.
 

Attachments

WOPL Sniffer

WOPL Sniffer

Veteran and General Yakker
#14
Joined
Aug 10, 2015
Messages
11,522
Location
Minnie-Soda
Tagline
Screw it
#14
laatsch55 said:
Get a couple 1000 volt/amp toroids with 120 volt primaries and a ceter tapped 162 volt secondary. Rectified voltage should be +,-, 113vdc...
Click to expand...
That sounds like a custom wind (Cha-Ching) at the transformer shop. A 120 to 230 step up is fairly common, a 120 to 162??? Lee, why 162 and not 200???
 
laatsch55

laatsch55

Administrator,
Staff member
#15
Joined
Jan 14, 2011
Messages
74,948
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#15
Because you're getting close to the swing voltage total of 250 for the 21196's, and that's what the guy had for 29.95 each....
 
WOPL Sniffer

WOPL Sniffer

Veteran and General Yakker
#16
Joined
Aug 10, 2015
Messages
11,522
Location
Minnie-Soda
Tagline
Screw it
#16
No luck Lee finding anything REMOTELY close to 120VAC Primary with a Secondary in the area of 120VAC-160VAC with center taps
 
WOPL Sniffer

WOPL Sniffer

Veteran and General Yakker
#17
Joined
Aug 10, 2015
Messages
11,522
Location
Minnie-Soda
Tagline
Screw it
#17
laatsch55 said:
I'm sure you can get whtever size toroid you wanted, found 4 pretty cheap a couple yerars ago for the monster monos, gonna have to build those one of these days. Check Apex jr.com
Click to expand...
Lee, did those have a manufacturer and a part # on them??? I cant find nothing.
 
laatsch55

laatsch55

Administrator,
Staff member
#18
Joined
Jan 14, 2011
Messages
74,948
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#18
That link to Apex jr, then click on the toroid pic, manufacturer is Keen-Ocean....
 
WOPL Sniffer

WOPL Sniffer

Veteran and General Yakker
#19
Joined
Aug 10, 2015
Messages
11,522
Location
Minnie-Soda
Tagline
Screw it
#19
Those are cheap ($29.00) and MADE in cina. their site sux, not much for specs no datasheet. I hate to but that stuff when I can't research it. Keen-Ocean has a shitty site too in Hong Dong Kong. Nothing but a picture of a transformer.
 
You must log in or register to reply here.
Top