Przem's Phase Linear 700 Series II White Oak Conversion

[P.L.F.]

It is to me.....

All we know is: [...] "I'm Chinese and I can speak Chinese" [...] but the $50K asked are apparently American....

 

[Phase Linear Phanatic]

Ok, I nFINALLY got what I wanted when routing the wires....the AC going to the meters are in a separate bundle..where they cross the low signal shielded near the meters they are at right angles. The shielded also routes in space away from everything....this one is QUIET!! We'll put it on the AP tomorrow...it sounds incredible though ...shold test very well..

I have to weigh in on that wiring work...................................................BEAUTIFUL.

 

[gadget73]

You need that kind of power especially for baroque organ because you run out of amp awful quick. Who wants to hear a cathedral organ at conversation levels? Same goes for symphony orchestra pieces

true. Organs in person move enough air that your body actually vibrates. You need wattage to try and duplicate that. Thats really the only thing I use remotely near the power of my PL 700 for. Anything else, it rarely even hits the 35w power indicator. I can do rock on 30 watts of tube power, but classical needs a lot more horsepower and headroom.

 

[marcok]

Probably I have discovered the reason :
the size of our living rooms .
My father's is 13 x 13 feet and mine is 17 x 17 .
Ciao
Marco

 

[laatsch55]

true. Organs in person move enough air that your body actually vibrates. You need wattage to try and duplicate that. Thats really the only thing I use remotely near the power of my PL 700 for. Anything else, it rarely even hits the 35w power indicator. I can do rock on 30 watts of tube power, but classical needs a lot more horsepower and headroom.

I don't know if Shpongle NEEDS more volume....but it certainly DESERVES more..

 

[laatsch55]

I have to weigh in on that wiring work...................................................BEAUTIFUL.

Thanks Dave...

 

[Fishoz]

BTW, while talking about speakers - is that a joke you think? -> http://www.ebay.com/itm/2-TANNOY-15...pt=Vintage_Electronics_R2&hash=item51c458593b

I'm about 20mi from Crystal Lake - anyone want to front me the cash and I'll go pick them up for you. Save the $250 shipping!?!

HAHAHAHAHAHAHA.....snort!

 

[P.L.F.]

I'm about 20mi from Crystal Lake - anyone want to front me the cash and I'll go pick them up for you. Save the $250 shipping!?!

HAHAHAHAHAHAHA.....snort!

!!!!

 

[laatsch55]

Rail voltage was 92.6 at 520 watts out into 8 ohms...

 

[laatsch55]

Uh.........the thermal cutouts work too........

 

[laatsch55]

Was listening to ----Zap---"The Bang".....when un-noticed by me or Timdalf, the cooling fan wa flat on the floor, not standing up as usual...

 

[laatsch55]

Workin it HARD!!!!

 

[jbeckva]

Hammer Down.. heck yes

 

[laatsch55]

Gotta find the weak spots!

 

[P.L.F.]

Hi Lee,
and how did you go about cooling fan socket finally? Can you post a pic of the back side?
Rail voltage looks very promising for testing...!

 

[laatsch55]

I'll post a pic when I'm done with it Przem. That and the power switch is undone. those are the last things I do before it gets buttoned up and shipped..

 

[P.L.F.]

I'll post a pic when I'm done with it Przem. That and the power switch is undone. those are the last things I do before it gets buttoned up and shipped..

OK, just a curiosity ... Thank you!

 

[P.L.F.]

How hard is the testing going, Lee? ...

 

[laatsch55]

She has passed the week long stress test. When I get home she comes off the K's and gets the fan plug and power switch then gets boxed up. Work got in the way yesterday Przem.

 

[P.L.F.]

She has passed the week long stress test. When I get home she comes off the K's and gets the fan plug and power switch then gets boxed up. Work got in the way yesterday Przem.

That's really a good news!

Lee, are you off for some oil wells' service works? How big is the area you look after?