The Ohm Model F's

Need to run to Home Depot and get some sealing foam for the cabinet to driver connection.
Not only do they take gobs of damping factor, they are low ohmage..nice little amp teasers...
 

Attachments

  • 20220925_131545.jpg
    20220925_131545.jpg
    1.2 MB · Views: 30
  • 20220925_131422.jpg
    20220925_131422.jpg
    971.5 KB · Views: 30
Consecutive serial numbers..

A couple of small nicks on the bottom of the cans, but otherwise excellent.
 

Attachments

  • 20220925_132028.jpg
    20220925_132028.jpg
    705.5 KB · Views: 7
No Sir Joe, they eat smaller amps.....they do have fast blow 4 amps in line....and yes they will delaminate the voice coil at 5 amps...
 
Very, very nice. I remember you saying these are your second pair, and you never should have sold your first pair. Congratulations!
They have mythical status. I've read much about them. Awesome.
 
Joe, was having the pan head chassis screws use the same size allen head as the knobs an accident?
 
I've read they have a sweet spot in regards to power. And not to drive them past that sweet spot, ever.
Omnidirectional,. Be very interesting to hear them in a large room with a good distance of separation between them.
 
I've read they have a sweet spot in regards to power. And not to drive them past that sweet spot, ever.
Omnidirectional,. Be very interesting to hear them in a large room with a good distance of separation between them.

They sound fabulous right before they blow. I blew up my original pair. The factory had shipped them with 5 amp fuses when they should have been 4's. Paid for shipping and they sent me a brand new pair...no cost to me...
 
Sure does Laz.

Foam in..
 

Attachments

  • 20220925_150324.jpg
    20220925_150324.jpg
    802.2 KB · Views: 15
Loose fuseholder
..
 

Attachments

  • 20220925_151220.jpg
    20220925_151220.jpg
    1 MB · Views: 19
Back
Top