Skynyrd77's Thank Godamighty , Finally My Own WOPL Build Thread!!

laatsch55 said:
Those CV's won't go to 40?
Click to expand...

After hookin up this sub. I'm thinkin the guy that did the mod. Set these crossovers so they run more like a 2 way. I think he focused on the overall midrange because they are nice crisp great image. Vocals are centered they sound amazin but I've been blaming the brightness on this basment but that's my thought on this. I remember him sayin something about adjusting the woofer to like 20hz lower than the mids so they blend... All I know is now it sounds awesome as shit as a team. I could be way off base here but only my stoned thoughts!!
 
laatsch55 said:
Crossover is where it starts rolling off the signal. The Phase is for what Joe said...IF the pot is detended. If it's a continous pot I would say it's for tuning the sub to your regular speaks.

Joe, due to crossover differences couldn't an adjustable phase pot be used to compensate for phase lag in the main speak ctossover?
Click to expand...


Yes, the phase knob will adjust for many system things such as placement of the sub in the room and the phasing with your mains. Just adjust the phase knob to where the bass sounds maximum, that means that your mains and the sub are working in phase and in unison with the placement of each in the room (compensate for standing waves and reflections)

Set the xover to where your mains say that they give out. If the bottom of your mains is 50Hz for example, set the sub for 50
 
Gepetto said:
Yes, the phase knob will adjust for many system things such as placement of the sub in the room and the phasing with your mains. Just adjust the phase knob to where the bass sounds maximum, that means that your mains and the sub are working in phase and in unison with the placement of each in the room (compensate for standing waves and reflections)

Set the xover to where your mains say that they give out. If the bottom of your mains is 50Hz for example, set the sub for 50
Click to expand...

Makes sence. Gonna take some work to get it tuned in. I think I need to get it away from wall and in center of room. It's a unvented 12in sub in a 13x13x13 box with a 1000w amp. It's like a bomb lol
 
Jani got the book done in time..
 

Attachments

  • SAM_0363.jpg
    SAM_0363.jpg
    88.9 KB · Views: 29
Joe, I noticed a few more spacers in this kit..........LMOAO!!!! man, you don't miss a trick....
 
Joe....R60,R61.....Pad17,18,19,20,21,22???????????????????????????????
 
Light board in.......wire the AC switch, back on with the faceplate, set the halfbiass one last time, put on the top and bottom covers and in the cabbage case it goes ....Jase tracking # Fed-Ex....770261362010
 

Attachments

  • SAM_0364.jpg
    SAM_0364.jpg
    96.3 KB · Views: 27
Hell yeah Lee. Got busy dicking around came back and wala.... The book looks nice also tell your wife thank you so much... Early nxt week ill be WOPL1000ing it up!!!! I'm doin a 12:30 jig now. Gonna smoke another for celebration
 
Gotta get yours outta the way.....Przems made it today...the UPS guy said it was the first box he ever carried from Poland....
 
AC switch .. Nav, that loom is the "Techflex" Joe sent me....
 

Attachments

  • SAM_0370.jpg
    SAM_0370.jpg
    100.8 KB · Views: 30
  • SAM_0369.jpg
    SAM_0369.jpg
    92 KB · Views: 31
  • SAM_0368.jpg
    SAM_0368.jpg
    87.7 KB · Views: 30
You must log in or register to reply here.
Back
Top