- Joined
- Jun 11, 2010
- Messages
- 6,870
- Location
- Powhatan, Virginia, United States
- Tagline
- WassupYa Mang?
Russ' Phase Linear 700B Going Fully Comp!!!!!!!
- Thread starter laatsch55
- Start date
- Joined
- Jan 14, 2011
- Messages
- 75,355
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
- Joined
- Jan 14, 2011
- Messages
- 75,355
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
- Joined
- Jan 14, 2011
- Messages
- 75,355
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
- Joined
- Jan 14, 2011
- Messages
- 75,355
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
- Joined
- Jan 14, 2011
- Messages
- 75,355
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
Yep it's F*&^%$ with me once to ofteh, also had a bad test cable, tetally no carry through. Was a solid wire coax that couln't take it I guess. I have since found some excellent mic cable I'm gonna have to make some out of....
The 700 does bass transients MUCH better, but for anything Mach 4 and below, it's a tossup now....
The 700 does bass transients MUCH better, but for anything Mach 4 and below, it's a tossup now....
- Joined
- Jan 14, 2011
- Messages
- 75,355
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
Yes Joe. Beern listening to the 400 all morning and afternoon.. Just put the 700 on awhile ago, and you can sense the headroom in the 700. As far as the sound goes the 700 appears to be a little boomier in the bass department with the 400 slightly tighter, that's about it....both ae crystal clear....
My 700 is up and warming up for final bias setting now. It was an uneventful bring up so far (I like them that way). Overall, I am very pleased with how this kit turned out but it is a lot of work (or maybe it was the side projects in between starting and finishing that made it seem longer 
)
It was about half the work of redoing the entire back wall wiring that I had done on that earlier 700.
You made the final change recommendations correct (R35 and the PAD3 connection point)??
)It was about half the work of redoing the entire back wall wiring that I had done on that earlier 700.
You made the final change recommendations correct (R35 and the PAD3 connection point)??
- Joined
- Jan 14, 2011
- Messages
- 75,355
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
My 700 is up and warming up for final bias setting now. It was an uneventful bring up so far (I like them that way). Overall, I am very pleased with how this kit turned out but it is a lot of work (or maybe it was the side projects in between starting and finishing that made it seem longer )
It was about half the work of redoing the entire back wall wiring that I had done on that earlier 700.
You made the final change recommendations correct (R35 and the PAD3 connection point)??
)It was about half the work of redoing the entire back wall wiring that I had done on that earlier 700.
You made the final change recommendations correct (R35 and the PAD3 connection point)??
- Joined
- Jan 14, 2011
- Messages
- 75,355
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
- Joined
- Jan 14, 2011
- Messages
- 75,355
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
- Joined
- Jan 14, 2011
- Messages
- 75,355
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof