Ron's Beast

WOPL Sniffer

Veteran and General Yakker
Joined
Aug 10, 2015
Messages
11,223
Location
Minnie-Soda
Tagline
Screw it
Ron, I just went through the Joint build of your amp. It pretty much got everything. the meters DID work apparently (for a while), don't know what you did to repair the one. Before you ship it out,,,,,, unplug it for a few minutes, and take the top off and check the little screws on the DCP and make sure they are snug (don't reef on them). there are 4 small 4-40 screws that hold it to the speaker jack stand-offs, and 7 screws where the wires come into the DCP. It has the original Attenuation switch still in it, maybe one of the resistors on the switch has a bad contact/cracked etc... That was before I found NOS switches.

before you put the top back on, call me and I'll have you check a couple things.
 
Top