Przem's Phase Linear 700 Series II White Oak Conversion

The book is done...now we can pack this puppy up...
 

Attachments

  • SAM_0760.jpg
    SAM_0760.jpg
    89.8 KB · Views: 50
You're very welcome Przem, sorry it took so long...Ya might want to PM me that freight forwarder address...and do I Fed-Ex it to him and forget about the rest of the trip??
 
Przem----Fed Ex Tracking number----771546049020....Enjoy!!
 
laatsch55 said:
The sensors would be a dry contact off a gauge or float...
Click to expand...



I generate those at the house Przem. I just finished loading the amp in the back of Janis pickup so she can take it to Fed Ex. They don't open till 10am and it won't register until it's scanned.
 
P.L.F. said:
And the baby arrived back home... :-)

Before setting the WOPL to my main system, I'm going to run some sound tests loaded with Yamaha's S4115H. Initially DC offset when the unit was cold was: R = 0.007 VDC, L = 0.011 VDC. When I pushed the mains button the light in my house dimmed for a second - a new interesting adventure... When plugged to my interim setup with 102dB-effective Yammies, no input, amp's pots at max volume - .... dead silence!!! Nothing AT ALL. No buzzing or similar 'effects'.... Excellent!
Then with "Where Do You Think You're Going?" and "Communiqué" of Dire Straits with preamp 'at 11' I was literally blown out from the room :hello1::hello1::hello1: ...!

TBC...
Click to expand...

Is picture #2 an optical illusion? To me it looks like the gain controls are on top.
 
Direct mode bypasses the 1uf cap, normal mode puts it inline. The purpose of the 1uf cap is to strip any DC coming from the preamp...
 
You must log in or register to reply here.
Back
Top