PL Series II Push Button Switch Caps

[WOPL Sniffer]

Feeble minds think alike right Lee??

 

[laatsch55]

Or pickled...

 

[J!m]

Mising dimensions on the switch cover drawing:

The location and spacing of the "guide rails" inside is not there...

 

[J!m]

This is as far as I can go with the info I have...

 

[George S.]

Yup, I even have the correct caps.

 

[J!m]

Who can confirm the details for me (you)?

 

[George S.]

Who can confirm the details for me (you)?

Jim, I should have said ceramic caps for the power switch. Get one of the guys who need these plastic button caps to mail you a actual original button cap and a old switch to check fit. Don't see how your going to replicate it well without a original.

 

[Skratch]

If you use both sets of contacts with a big ceramic snubber cap across it, you'll have more than enough for arc free operation for the life of the amp.

What cap are you using for the snubber

 

[WOPL Sniffer]

What cap are you using for the snubber

You have been here WAY longer than me...... Have you not perused the good stuff

post #2
https://forums.phxaudiotape.com/threads/parts-database.7075/

 

[WOPL Sniffer]

What cap are you using for the snubber

Not them, those are for the BR..... Do you have the original switch? The part # is on it

 

[WOPL Sniffer]

What cap are you using for the snubber

Any of the Z5U ceramic disc cap 594-S503Z69Z5UL63L0R is the one I get (Mouser)

 

[J!m]

Well, I could print a run of these if someone wants to add the dimensions to the drawing. I’m half way through design so just those interior details to add in…

 

[grapplesaw]

Well, I could print a run of these if someone wants to add the dimensions to the drawing. I’m half way through design so just those interior details to add in…

I’ll get you those this morning Jim

 

[mlucitt]

This is as far as I can go with the info I have...

Jim, I knew I missed something. I have added the missing dimensions.

Mark

 

[J!m]

I was having trouble modifying the drawing I had started... I may have to re-draw again from scratch...