Phase Linear 700 Series Amplifier Specs - Sales Brochures, Owner's & Service Manuals

oldphaser

Chief Journeyman
Joined
Sep 8, 2012
Messages
848
#1
Here is my best effort at putting into one place all the specifications for Phase Linear 700 series amplifiers (i.e. 700, 700B, 700 II and Pro 700).

NOTE: Although I attempted to load all the files so they would appear in numerical order below that doesn't appear to be the case. So please start with file number 1 (Phase Linear 700-the first 700) and work your way towards file number 27 (Phase Linear Pro700-the last 700 series amp).

These specs were obtained from Phase Linear sales brochures, owner's manuals and service manuals.

In a number of cases, there were more than (1) version of the sales brochures, owner's manuals and service manuals. The location and versions are included in the title of the documents. In most cases the versions correlate also to where Phase Linear was located at the time. They locations were as follows; 1.) Seattle, 2.) Edmonds and 3.) Lynnwood.

NOTE: I do not have a copy of the Phase Linear 700B owner's manual when they were located in Edmonds.

NOTE: I do not have complete/detailed specs for the 700HF and Kelly DeYong amps other than the 700HF was rated at 350 watts per channel both channels driven into 8 ohms from 20Hz to 100KHz at .25% THD. There are some specs also for the Clair Brothers 700B amps.

Ed
 

Attachments

mlucitt

Veteran and General Yakker
Joined
Jun 24, 2011
Messages
3,492
Location
Jacksonville, FL
#4
Thank you for posting the information - I'm getting ready to start restoration on a PRO 700, every bit of info helps !!
Welcome aboard, could you be more specific regarding your restoration? You will find that many of the original parts are no longer available (NLA). However, there are more modern and significantly better parts available that many of us have used to rebuild/restore/upgrade our Phase Linear amplifiers. The PRO 700 is very similar to the later versions of the PL 700 Series II.
Pictures help us to understand your situation. There is a big difference between restoring a museum piece and crafting a modern example of a vintage amplifier that will perform better than anything currently available.
 

Greg

Journeyman
Joined
Jun 11, 2022
Messages
204
#5
Here is my best effort at putting into one place all the specifications for Phase Linear 700 series amplifiers (i.e. 700, 700B, 700 II and Pro 700).

NOTE: Although I attempted to load all the files so they would appear in numerical order below that doesn't appear to be the case. So please start with file number 1 (Phase Linear 700-the first 700) and work your way towards file number 27 (Phase Linear Pro700-the last 700 series amp).

These specs were obtained from Phase Linear sales brochures, owner's manuals and service manuals.

In a number of cases, there were more than (1) version of the sales brochures, owner's manuals and service manuals. The location and versions are included in the title of the documents. In most cases the versions correlate also to where Phase Linear was located at the time. They locations were as follows; 1.) Seattle, 2.) Edmonds and 3.) Lynnwood.

NOTE: I do not have a copy of the Phase Linear 700B owner's manual when they were located in Edmonds.

NOTE: I do not have complete/detailed specs for the 700HF and Kelly DeYong amps other than the 700HF was rated at 350 watts per channel both channels driven into 8 ohms from 20Hz to 100KHz at .25% THD. There are some specs also for the Clair Brothers 700B amps.

Ed
very nice
 

flawsjef

New Around These Parts
Joined
Nov 12, 2022
Messages
7
Location
Minnesota, USA - "Bambi Land"
Tagline
"I just want to play Jerry right ... "
#6
Welcome aboard, could you be more specific regarding your restoration? You will find that many of the original parts are no longer available (NLA). However, there are more modern and significantly better parts available that many of us have used to rebuild/restore/upgrade our Phase Linear amplifiers. The PRO 700 is very similar to the later versions of the PL 700 Series II.
Pictures help us to understand your situation. There is a big difference between restoring a museum piece and crafting a modern example of a vintage amplifier that will perform better than anything currently available.
You Gots It ... started a thread, with some good detail pictures.
https://forums.phxaudiotape.com/threads/pl700-pro-restoration.10699/

Amp was functioning when I set it aside ... had a one-off problem, likely a thermal/impedance issue caused by abuse, and it gigged hard and fine for a half year after that. Given it has sat unpowered for two decades, deserves appropriate attention as opposed to a smoke test.
 
Top