Phase Linear 700 series 2 faceplate needed

Dr12volt

Dr12volt

New Around These Parts
Joined
Jan 22, 2023
Messages
30
I have a 700 series 2 that someone has brused the faceplate so it's no longer champaign colored. Does anyone have the inner and outer faceplate to make it look original
 

Attachments

  • 63765 (1).jpeg
    63765 (1).jpeg
    889.4 KB · Views: 30
Looks like the handles (drawer pulls from home depot) and the right channel meter are also in need of replacement. Time for a WOPL treatment. Joe has new Series II faceplates and meter boards and handles are easy to find.
 
I have a NOS 700 Series II face plate from 1978ish but it's going to go on my last amp. That would be the closest to Champagne colored as you can get. You can imagine the price....... There should be plenty of used face plates around. I probably have a stack of them somewhere.
 
WOPL Sniffer said:
I have a NOS 700 Series II face plate from 1978ish but it's going to go on my last amp. That would be the closest to Champagne colored as you can get. You can imagine the price....... There should be plenty of used face plates around. I probably have a stack of them somewhere.
Click to expand...
If you find one please let me know. Thanks
 
WOPL Sniffer said:
Looks like the handles (drawer pulls from home depot) and the right channel meter are also in need of replacement. Time for a WOPL treatment. Joe has new Series II faceplates and meter boards and handles are easy to find.
Click to expand...
I have a set of handles and yes the meter is a bit odd. It will work perfectly after it warms up. Thanks
 
I just looked, I don't have a used face plate, just my NOS one. I think somebody here bought all my old series II's. I only have a couple Pro 700's and a few 700B FP's
 
Here are a few pictures of Joe’s Black faceplates:

i-XBvpnrv-4K.jpg

i-4BCm5SS-4K.jpg


i-CpQ2TMC-4K.jpg
 
Last edited:
Gepetto said:
I offer beautiful S2 replacement faceplates. The one on yours is not original as it has square corners...
Click to expand...
Do you also have the black knobs to go with your black faceplate? I also see that your level meters display differently. Are those also White Oak replacements?
 
Dr12volt said:
Do you also have the black knobs to go with your black faceplate? I also see that your level meters display differently. Are those also White Oak replacements?
Click to expand...
Black knobs are available all over the web, every user has a different preference. And yes, the meters that Eric has are the White Oak premium upgrade meters.
 
Dr12volt said:
Do you also have the black knobs to go with your black faceplate? I also see that your level meters display differently. Are those also White Oak replacements?
Click to expand...
The White Oak LED meters can display either Bar or Dot configuration, selectable by a switch based on your preference.
 
You must log in or register to reply here.
Back
Top