Phase Linear 700 series 2 faceplate needed

[Dr12volt]

I have a 700 series 2 that someone has brused the faceplate so it's no longer champaign colored. Does anyone have the inner and outer faceplate to make it look original

 

[WOPL Sniffer]

Looks like the handles (drawer pulls from home depot) and the right channel meter are also in need of replacement. Time for a WOPL treatment. Joe has new Series II faceplates and meter boards and handles are easy to find.

 

[WOPL Sniffer]

I have a NOS 700 Series II face plate from 1978ish but it's going to go on my last amp. That would be the closest to Champagne colored as you can get. You can imagine the price....... There should be plenty of used face plates around. I probably have a stack of them somewhere.

 

[Dr12volt]

I have a NOS 700 Series II face plate from 1978ish but it's going to go on my last amp. That would be the closest to Champagne colored as you can get. You can imagine the price....... There should be plenty of used face plates around. I probably have a stack of them somewhere.

If you find one please let me know. Thanks

 

[Dr12volt]

Looks like the handles (drawer pulls from home depot) and the right channel meter are also in need of replacement. Time for a WOPL treatment. Joe has new Series II faceplates and meter boards and handles are easy to find.

I have a set of handles and yes the meter is a bit odd. It will work perfectly after it warms up. Thanks

 

[Dr12volt]

If you find one please let me know. Thanks

I could also use a pair of gain knobs if you have any. Thanks.

 

[mlucitt]

I probably have a stack of them somewhere.

Sniff, you should trade him for his "brushed" faceplate, then you can paint it green!

 

[J!m]

Get it chrome plated!

 

[Dr12volt]

Get it chrome plated!

That's not a terrible idea. Considered it bit then I would have to do the rest of my PL to match and that would get expensive.

 

[Gepetto]

That's not a terrible idea. Considered it bit then I would have to do the rest of my PL to match and that would get expensive.

I offer beautiful S2 replacement faceplates. The one on yours is not original as it has square corners...

 

[WOPL Sniffer]

I just looked, I don't have a used face plate, just my NOS one. I think somebody here bought all my old series II's. I only have a couple Pro 700's and a few 700B FP's

 

[MusicSteve]

I offer beautiful S2 replacement faceplates. The one on yours is not original as it has square corners...

Joe
Can you Please post some pic of them 400II and 700II. Are they the same as Original?

 

[Hexis22]

Here are a few pictures of Joe’s Black faceplates:

 

[Hexis22]

He also makes Silver versions… for some reason.

 

[Hexis22]

 

[Dr12volt]

I offer beautiful S2 replacement faceplates. The one on yours is not original as it has square corners...

Do you also have the black knobs to go with your black faceplate? I also see that your level meters display differently. Are those also White Oak replacements?

 

[mlucitt]

Now all we need is someone to start machining those Aluminum Faceplate Bolts...

 

[Gepetto]

Do you also have the black knobs to go with your black faceplate? I also see that your level meters display differently. Are those also White Oak replacements?

Black knobs are available all over the web, every user has a different preference. And yes, the meters that Eric has are the White Oak premium upgrade meters.

 

[AngrySailor]

Now all we need is someone to start machining those Aluminum Faceplate Bolts...

Lemme size em up when I get home from sailing. Might be able to make a run of them. Pretty sure they’re anodized post machining also which isn’t a big deal to get done...

 

[Hexis22]

Do you also have the black knobs to go with your black faceplate? I also see that your level meters display differently. Are those also White Oak replacements?

The White Oak LED meters can display either Bar or Dot configuration, selectable by a switch based on your preference.