Mark Lucitt's stuff

Was he buildin a tesla coil???:mrgreen:

laatsch55 said:
Here ya go Dave...


I was starting to build this one:
http://www.saunalahti.fi/dncmrc1/

Because it looked easy and was a proven design. His interactive plan lets you change any parameter in case you can’t find a specific value. You can just dial-in the value that you have and it will compute the new specifications.

I have:
One 20Amp 120VAC Line Filter
Two Microwave Oven Transformers (MOT)
Two 1 uF 2200V Microwave Oven Capacitors
Two .01 uF 30KV Capacitors
Four 1000pF 6300V Ceramic Capacitors
Two .5 uF 25KV Capacitors (these are rated too high for a Tesla coil of this design, but they can be fun)
Two .01 30KV Signal Capacitors
Two 4.00 H Inductors
Four 33 Meg 3500V Resistors
Four 1Amp 16KV Diodes
Ten feet of 100KV Primary Wire
Fifteen feet of Primary winding (this is ¼†copper tubing)
One Roll of 1300 Feet of Secondary Winding Enamel Wire (need a 4†piece of PVC pipe to wind on)
One 120V 60Hz Spark Gap Motor
Solid Copper Buss Bar
Top Toroid (this is 4â€/100mm flexible dryer duct)
Stand made of glass and plastic (needs the hole cut in the top)
Instructions
Click to expand...
 
laatsch55 said:
OK guys I have a bunch of pics but can't do anything with them. They are in excel, how do I do a file conversion?
Click to expand...

When all else fails capture the screen save the file(s) and crop individually in your photo/image editor (such as Photoshop etc).
 
I remember the Panavise's price but the other accessories weren't priced. I am interested in all of the Panavise stuff. It will be May before I can do it though. I'm paying my other debts too and will get Web's 5050 at the same time...I hope this is okay for Mark.
 
Get ahold of me and I'll see what I can do but I'd like it and want to buy it.
 
Quality stuff Doug, don't hesitate.. I'm getting more pics on the morning..
 
fitz43 said:
Orange, are you still interested in the variac? If not, I would like to see a picture of it, before I commit to buying it. Doug
Click to expand...

If I get the vise I have to ask if I can wait until May. I wouldn't make him wait for two things. Please do, it's all yours if you want it.

I wanted the Panavise the last time he made a list. A variac will show up again somewhere. As I said, I want to do SOMETHING for Mark and his wife and my April budget is almost filled up.
 
Last edited:
That's what I wanted the most.
 
laatsch55 said:
Here ya go Dave...


I was starting to build this one:
http://www.saunalahti.fi/dncmrc1/

Because it looked easy and was a proven design. His interactive plan lets you change any parameter in case you can’t find a specific value. You can just dial-in the value that you have and it will compute the new specifications.

I have:
One 20Amp 120VAC Line Filter
Two Microwave Oven Transformers (MOT)
Two 1 uF 2200V Microwave Oven Capacitors
Two .01 uF 30KV Capacitors
Four 1000pF 6300V Ceramic Capacitors
Two .5 uF 25KV Capacitors (these are rated too high for a Tesla coil of this design, but they can be fun)
Two .01 30KV Signal Capacitors
Two 4.00 H Inductors
Four 33 Meg 3500V Resistors
Four 1Amp 16KV Diodes
Ten feet of 100KV Primary Wire
Fifteen feet of Primary winding (this is ¼†copper tubing)
One Roll of 1300 Feet of Secondary Winding Enamel Wire (need a 4†piece of PVC pipe to wind on)
One 120V 60Hz Spark Gap Motor
Solid Copper Buss Bar
Top Toroid (this is 4â€/100mm flexible dryer duct)
Stand made of glass and plastic (needs the hole cut in the top)
Instructions
Click to expand...
Okey dokey, whooyah! I'm in. How do I get the funds to you, Lee?
 
Ron, he said he had to get over to his brothers house and get most of he collection back to his house so when he called you he could answer your questions..
 
You must log in or register to reply here.
Back
Top