Mark Lucitt's stuff

[Skynyrd77]

Ron the WOPL recruiter lol!!! Worked for me I'm a believer and soon to be owner lol!!

 

[jbeckva]

Was he buildin a tesla coil???

Here ya go Dave...


I was starting to build this one:
http://www.saunalahti.fi/dncmrc1/

Because it looked easy and was a proven design. His interactive plan lets you change any parameter in case you can’t find a specific value. You can just dial-in the value that you have and it will compute the new specifications.

I have:
One 20Amp 120VAC Line Filter
Two Microwave Oven Transformers (MOT)
Two 1 uF 2200V Microwave Oven Capacitors
Two .01 uF 30KV Capacitors
Four 1000pF 6300V Ceramic Capacitors
Two .5 uF 25KV Capacitors (these are rated too high for a Tesla coil of this design, but they can be fun)
Two .01 30KV Signal Capacitors
Two 4.00 H Inductors
Four 33 Meg 3500V Resistors
Four 1Amp 16KV Diodes
Ten feet of 100KV Primary Wire
Fifteen feet of Primary winding (this is ¼†copper tubing)
One Roll of 1300 Feet of Secondary Winding Enamel Wire (need a 4†piece of PVC pipe to wind on)
One 120V 60Hz Spark Gap Motor
Solid Copper Buss Bar
Top Toroid (this is 4â€/100mm flexible dryer duct)
Stand made of glass and plastic (needs the hole cut in the top)
Instructions

 

[laatsch55]

Appears so brother Jer!!

 

[laatsch55]

Ron the WOPL recruiter lol!!! Worked for me I'm a believer and soon to be owner lol!!

\

Amen, all they have to do is hear one...

 

[laatsch55]

Lee - do you think item number 23 will attach to a bed?

The shaker thing???? F*&^ YES!!! Now your talkin Nav!!

 

[laatsch55]

Have not heard from him about his records, been a couple days now

Ron that might be the fault of my e-mail. I will e-mail him again.

 

[orange]

OK guys I have a bunch of pics but can't do anything with them. They are in excel, how do I do a file conversion?

When all else fails capture the screen save the file(s) and crop individually in your photo/image editor (such as Photoshop etc).

 

[orange]

I remember the Panavise's price but the other accessories weren't priced. I am interested in all of the Panavise stuff. It will be May before I can do it though. I'm paying my other debts too and will get Web's 5050 at the same time...I hope this is okay for Mark.

 

[laatsch55]

the 50.00 is for all the Panavise parts.

 

[orange]

Get ahold of me and I'll see what I can do but I'd like it and want to buy it.

 

[fitz43]

Get ahold of me and I'll see what I can do but I'd like it and want to buy it.

Orange, are you still interested in the variac? If not, I would like to see a picture of it, before I commit to buying it. Doug

 

[laatsch55]

Quality stuff Doug, don't hesitate.. I'm getting more pics on the morning..

 

[orange]

Orange, are you still interested in the variac? If not, I would like to see a picture of it, before I commit to buying it. Doug

If I get the vise I have to ask if I can wait until May. I wouldn't make him wait for two things. Please do, it's all yours if you want it.

I wanted the Panavise the last time he made a list. A variac will show up again somewhere. As I said, I want to do SOMETHING for Mark and his wife and my April budget is almost filled up.

 

[laatsch55]

Yeah, he'll wait Steve..

 

[orange]

That's what I wanted the most.

 

[NavLinear]

The shaker thing???? F*&^ YES!!! Now your talkin Nav!!

I've always believed in repurposing stuff and this seemed like a good fit!

 

[premiumplus]

Here ya go Dave...


I was starting to build this one:
http://www.saunalahti.fi/dncmrc1/

Because it looked easy and was a proven design. His interactive plan lets you change any parameter in case you can’t find a specific value. You can just dial-in the value that you have and it will compute the new specifications.

I have:
One 20Amp 120VAC Line Filter
Two Microwave Oven Transformers (MOT)
Two 1 uF 2200V Microwave Oven Capacitors
Two .01 uF 30KV Capacitors
Four 1000pF 6300V Ceramic Capacitors
Two .5 uF 25KV Capacitors (these are rated too high for a Tesla coil of this design, but they can be fun)
Two .01 30KV Signal Capacitors
Two 4.00 H Inductors
Four 33 Meg 3500V Resistors
Four 1Amp 16KV Diodes
Ten feet of 100KV Primary Wire
Fifteen feet of Primary winding (this is ¼†copper tubing)
One Roll of 1300 Feet of Secondary Winding Enamel Wire (need a 4†piece of PVC pipe to wind on)
One 120V 60Hz Spark Gap Motor
Solid Copper Buss Bar
Top Toroid (this is 4â€/100mm flexible dryer duct)
Stand made of glass and plastic (needs the hole cut in the top)
Instructions

Okey dokey, whooyah! I'm in. How do I get the funds to you, Lee?

 

[Northwinds]

Still no contact about the records

 

[laatsch55]

Ron, he said he had to get over to his brothers house and get most of he collection back to his house so when he called you he could answer your questions..

 

[laatsch55]

Okey dokey, whooyah! I'm in. How do I get the funds to you, Lee?

Pay-pal , mail me a check, carrier pidgeon, hot blonde messenger, whatever works....