Ken Nelson's Phase Linear 3300 ser II Pre-amp

You sly dog....... Got the Mouser order, 4592's and TLE2072CP's. All resistors and caps. Should be interesting...
 
laatsch55 said:
So Joe has lain down the gauntlet, suggesting (with a corresponding part number) to parallel 3 of the red caps and put them where the blue one is. The challenge has been accepted.....
Click to expand...

Ok Lee - you have my full attention now. I'm curious how you're going to put ten pounds in a one pound sack. It's gonna be tight (not always a bad thing) but you can do it!
 
NavLinear said:
Ok Lee - you have my full attention now. I'm curious how you're going to put ten pounds in a one pound sack. It's gonna be tight (not always a bad thing) but you can do it!
Click to expand...

As one might say "Bust a nut!"
 
derek92994 said:
If it was in "The Cave" i would be able to say, but one could call it "the point of knot" lol.
Click to expand...

Ok - I thought I had you in the previous post but I'm really not familiar with "the point of knot". I could guess but we would have to go to the dark side for this one. Knot seems to imply that it's roped in - so to speak.
 
Last edited:
That means put out till the hernia explodes is what it is here.
 
Dennis, that one surfboard you sent was so very, very close to what I needed, but it did inspire me to find something....
 
Just maybe.....
 

Attachments

  • 100_3038.jpg
    100_3038.jpg
    93.1 KB · Views: 57
  • 100_3037.jpg
    100_3037.jpg
    94.5 KB · Views: 54
laatsch55 said:
Dennis, that one surfboard you sent was so very, very close to what I needed, but it did inspire me to find something....
Click to expand...

I have some more inspiration to send your way when the cabbage cage shows up. That's one of the reasons I send you off the wall shit. I figure the other reason is to confuse you - of course it confuses me too.

I picked up the SAE amp and the Yammie linear TT today from Dave. They are both in good condition for the price - Dave scored the Yammie PX-3 at a swap meet 5 years ago for 15 bucks!
 
Dennis, your goodie boxes are a very anticipated event..
 
laatsch55 said:
Dennis, your goodie boxes are a very anticipated event..
Click to expand...

I actually found some NOS stuff Phase Linear used in their Power Amplifier builds. Of course this is a teaser.

BTW listening to a remastered "Teaser" - Tommy Bolin CD with some bonus stuff. I forgot how good this guy was. I had both of his solo albums - but I had completely forgotten about his album "Private Eyes" as I had that one for a few months before it was stolen as was the Teaser album but I had that one for almost a year. Very good tunes.
 
Since it was brought up I've been doing a lot of James Gang..
 
laatsch55 said:
The 3 paralleled 10uf test at 30.7, close nuf...
Click to expand...

So what does the bottom look like? The PWB bottom that is. What did you do to hold the board in place - cool way to add those as it looked like a PITA to get those bad boys in that small of a space.

So when you get all of the new components in you'll have to give us your opinion of the sound - can't wait.

Oh yeah - what board did you find to make this happen?
 
It was a partial piece of the db range switch on a Pioneer RG 1 dynamic processor. The holes on the far edge line up with the holes in the 3300PCB. It will be stood off with those 4 leads and 1 standoff opposite the in leads.
 

Attachments

  • 100_3040.jpg
    100_3040.jpg
    88.3 KB · Views: 38
laatsch55 said:
That's enough teasin, fess up!!
Click to expand...

Ok - no big deal but when looking through a bunch of parts that will be disposed of soon I found some terminal strips that Phase used as grounding points and another type used as a more traditional terminal strip. I found them when pawing through parts bins and these jumped out. I hate to see this old stuff go - some of the items date back to the early 60's.
 
You must log in or register to reply here.
Back
Top