Derek92994's 700 Ser II White Oak conversion

derek92994

derek92994

Veteran and General Yakker
#443
Joined
May 1, 2013
Messages
7,399
Location
Australia
Tagline
Those who enter the man cave will get WOPLed
#443
Also will there be a Meter sensitivity adjustment so I can make them dance at low levels?
 
G

gadget73

Journeyman
#450
Joined
Aug 29, 2014
Messages
465
Tagline
---
#450
What holds the backplane boards in, new hole with a screw and a standoff or is there an existing hole that gets re-purposed ?
 
laatsch55

laatsch55

Administrator,
Staff member
#452
Joined
Jan 14, 2011
Messages
75,288
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#452
12 outputs of 2-6/32 machine screws...24 in total on each side...Each output screws into a threaded insert that is soldered into the backplane. The screw in the middle you see showing is a line-up till the outputs are put in then used for a ground point to the chassis.


Pots wired, now for the board!!

And metal standoffs for the board...
 

Attachments

laatsch55

laatsch55

Administrator,
Staff member
#453
Joined
Jan 14, 2011
Messages
75,288
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#453
Question Sir Joe. When it's time to power up, and I'm using my outboard power supply, anything wrong with just going to B+ on the cap with the B+ power wire off the power supply ?? And the same with the B- supply and ground? Nothing wrong with going through the caps in the chassis??
 
Gepetto

Gepetto

Administrator
Staff member
#454
Joined
May 15, 2011
Messages
14,246
Location
Sterling, MA
Tagline
Old 'Arn Enthusiast
#454
laatsch55 said:
Question Sir Joe. When it's time to power up, and I'm using my outboard power supply, anything wrong with just going to B+ on the cap with the B+ power wire off the power supply ?? And the same with the B- supply and ground? Nothing wrong with going through the caps in the chassis??
Click to expand...
Nothing wrong with that Lee, just ensure that the bulk caps inside the amp are fully wired in. You need the very local presence of the bulk caps. They cannot be remote.
 
You must log in or register to reply here.
Top