Derek92994's 700 Ser II White Oak conversion

[laatsch55]

Yeah, lets try em..

 

[derek92994]

Shes been on for about 10 mins

 

[laatsch55]

Is that farenheit?

 

[derek92994]

1 more

 

[derek92994]

Is that farenheit?

Yep

 

[laatsch55]

Next time, shine it on the black part of the transistor..

 

[derek92994]

Roger that, do you want me to retest and do you want Faren or celcius?

 

[laatsch55]

Ok....let's check low voltage test points on both channels. Negative to backplane ground, positive to test points..

 

[laatsch55]

Roger that, do you want me to retest and do you want Faren or celcius?

No, Fahrenheit from here on though when we do..

 

[derek92994]

Ok....let's check low voltage test points on both channels. Negative to backplane ground, positive to test points..

104.7 and 104.6 using ground and tp1 b+ on backplane

 

[laatsch55]

Low voltage on the driver board, +15, -15 middle of the board and left edge..

 

[derek92994]

Left 15.06+ 15.66-
Right 15.02+ 15.57-

 

[laatsch55]

DC offset, both channels...Neg to backplane ground, pos to backplane out...

 

[derek92994]

Left 0.4
Right 1.1
200m dc scale on dmm

 

[laatsch55]

Bias Ok?

 

[derek92994]

Bias 355 and 354

 

[laatsch55]

Ok, now lets check driver board input voltages and compare right to left...Negative to backplane ground, positive to 3 thru 8 on each side, write down the values..

 

[derek92994]

So you are talking about the green connector 3r-8r etc?

 

[laatsch55]

Yep, the screw on the Phoenix connectors..

 

[derek92994]

Exclude pnpr one between 5r and 6r?