Crown Macro Reference Monster amp rework.

Why suck a huge thing to drive LEDs?

is ATI a brand name perhaps?
 
Maybe fluorescent? Those’d need a big tranny to up the voltage.
 
Maybe I can take it apart and repair it. I know that it was a common failure for these amps. I read that they were an issue but never saw if anybody fixed one. Time for more investigation.
 
I'll have to see if my ac power supply goes up high enough, EL panels can take upwards of 100VAC.
 
I'll have to goof with that later. Going to pick up the new car. I need to shovel again..... Go figure.
 
The specs for an average EL panel has a wide operating range so finding an inverter should be easy enough.


  • Glow Size: 10 cm x 10 cm (3.95" x 3.95")
  • Plastic Size: 10.4 cm x 10.4 cm (4.1" x 4.1"), about 0.5mm thick
  • Panel lifetime: >25000 hours
  • Operating voltage: 60-250VAC
  • Operating Frequency: 50-5000HZ
  • Current Draw: 0.14mA/cm2 (max) @ 110V / 400Hz
  • Initial Brightness: 85 cd/m2
  • Operating Temperature: -50 C / 65 C
  • 45 nF per panel
 
Back
Top