I have the big TT cartridge test running with 7 TT ‘s through my new selector box connected to a reworked Carver c-4000 through MM2 input
A mighty Thorens 125mkll with a Decca FFsc4 MI cartridge is going direct to the Carver on MM1 input. This will be the reference TT as it is truly beautiful sounding set up
The second MM2 input was the MC input and I modified it to match the MM1 input so basically two MM inputs on this unit. This second input has no capacitance to select in the carver ( I disabled the 5 cap switch I installed when building it) and now have 12 capacitance to choices from on the selector box.
some issues to fix but all going good. It’s never easy right?
now the problem is the Decca!!
I haven’t listen to it for some time. I seam to be sitting here with it playing instead of doing my ABC testing. Oh well I’ll get there. By the way it does sound really good, oh right I already said that.
I have the following on 5 PL 8000 linear tracker’s
Shure v15 4 OEM byrellium cantilever and ? Stylus could be elliptical, hyper or even Micro ridge
shure v15 4 with new micro ridge and boron cantilever
shure v15 4 with cheap elliptical aftermarket
Shure V15 3 with OEM stylus-probably elliptical stylus
Signet TK9 with new line contact nude stylus on tapered aluminum cantilever
also
pioneer pl l1000 linear tracker with
Shure v15 4 and new nude micro ridge on boron cantilever. This is not operating yet
and a pioneer pl-600 long S arm (10”)
It has a pioneer 600 cartridge at this time
cartridges in the line
Stanton EEE 681 MI
Pickering 4000 MM with elliptical needle
Pickering 3000 MM with its special stylus
Technicraft 1000 with conical stylus ( don’t w
right this one off to fast)
Shure 1200hpr
Shure whlb
A mighty Thorens 125mkll with a Decca FFsc4 MI cartridge is going direct to the Carver on MM1 input. This will be the reference TT as it is truly beautiful sounding set up
The second MM2 input was the MC input and I modified it to match the MM1 input so basically two MM inputs on this unit. This second input has no capacitance to select in the carver ( I disabled the 5 cap switch I installed when building it) and now have 12 capacitance to choices from on the selector box.
some issues to fix but all going good. It’s never easy right?
now the problem is the Decca!!
I haven’t listen to it for some time. I seam to be sitting here with it playing instead of doing my ABC testing. Oh well I’ll get there. By the way it does sound really good, oh right I already said that.
I have the following on 5 PL 8000 linear tracker’s
Shure v15 4 OEM byrellium cantilever and ? Stylus could be elliptical, hyper or even Micro ridge
shure v15 4 with new micro ridge and boron cantilever
shure v15 4 with cheap elliptical aftermarket
Shure V15 3 with OEM stylus-probably elliptical stylus
Signet TK9 with new line contact nude stylus on tapered aluminum cantilever
also
pioneer pl l1000 linear tracker with
Shure v15 4 and new nude micro ridge on boron cantilever. This is not operating yet
and a pioneer pl-600 long S arm (10”)
It has a pioneer 600 cartridge at this time
cartridges in the line
Stanton EEE 681 MI
Pickering 4000 MM with elliptical needle
Pickering 3000 MM with its special stylus
Technicraft 1000 with conical stylus ( don’t w
right this one off to fast)
Shure 1200hpr
Shure whlb
Attachments
-
2.7 MB Views: 7