700B WOPL Audition List

[laatsch55]

Those are getting harder to find at a decent price...

 

[Rex Everything]

Those are getting harder to find at a decent price...

Good and bad I suppose....

 

[laatsch55]

Not to me, that's just plain bad...

 

[laatsch55]

get it yet Jase??

 

[Northwinds]

He messaged me a little while ago, said he was still waiting on delivery. Jer should be getting Blackie today also according to tracking

 

[Skynyrd77]

It is here finally lol. Now for the unpacking and the real test!!!

 

[Northwinds]

Lucky Bastard

 

[Northwinds]

I am just waiting for the

HOLY FVCK

 

[Skynyrd77]

It is super cold! I'm gonna let it warm up to house temp for awhile. Hey lee I noticed 1 thing about it while unpacking! All meters and knobs are all good. But I did notice looking down at top of amp I can see the board upright on back. And it is loose!! What should I do about that???

 

[Northwinds]

That BLOWS, this is not a full comp so it must be the control board??? I think there is black donut thingies that hold it down

 

[Skynyrd77]

It just wobbles a bit. But I don't want to hurt anything not knowing . Hey Paul did you notice that when you had it? Should I open her up and get it tightened down?

 

[Northwinds]

I am truly surprised Lee has not commented yet. Wait and see what he's says Jason, bad things can happen when fingers go into tight places, well some tight places anyway, the moist ones are fine, the electronic ones, not so much

 

[laatsch55]

Take the top cover off. Take a pic. Is it the top hold down for the control board?

 

[laatsch55]

I am truly surprised Lee has not commented yet. Wait and see what he's says Jason, bad things can happen when fingers go into tight places, well some tight places anyway, the moist ones are fine, the electronic ones, not so much

Just got in from work Ron. They needed the old man today. Agree on the tight places!! LOL..

 

[Skynyrd77]

I am running to town but yes. It's just the top of board that wobbles a bit.im assuming there's a clip or something that's loose or came off. Give me a hour or 2 and I'll get top off and pic. It's still really cold!!

 

[laatsch55]

There are two studs holding the control board on. 5/16 nut driver and snug it back down, or 5/16 wrench. No biggie. They warm up faster if you turn them on .....

 

[Skynyrd77]

There are two studs holding the control board on. 5/16 nut driver and snug it back down, or 5/16 wrench. No biggie. They warm up faster if you turn them on .....

Lol!! Its very cold prob like 0 for real!! And that should be easy fix. I'll let ya know in a bit

 

[laatsch55]

Ot doesn't have to warm up.... yeah easy fix, 5 minutes tops..

 

[Skynyrd77]

Ok well the top nut was about to fall off so I got it snugged up good. But on bottom long bolt is there but nut is gone. It's tight enough and I still have the bolt through board on bottom so it's secure for now. I will find a nut . But I'm gonna hook up my speakers and my pre and get this baby going!! Any last minute advise?? I'm prob 15 mins away from show time maybe 20 lol

 

[laatsch55]

Drive it like ya stole it!!