Search results

On the second floor of my shop I have a commercial type pool table from a bar it has the ramps for the balls to roll down to the hopper, well one day a few years back I shot a ball into a side pocket and the ball started to roll but stopped I put another ball down the same pocket and nothing...

Tried to get a pic of the spacer to show clearance of surround to baffle, then a pic of the port with a screen I made to keep mice out of the cabs, I used the rims from the port end I cut, and a pic of one of the cabs sitting next to a 816...

I'm using a DBX 234 for crossover.... It is just to expensive to heat that shop during the winter, I go out now and then and fire the wood stove up but yea drives me nuts not being able to go out everyday. The finish work should go pretty fast once I get back on them I have most everything ready...

Well work is done on these till next spring I have a bunch of other things that need to be done for the coming winter but after I put that 1/2 mfd spacer in I monted the woofer back in and the soruond now clears the cab so that is all good. Next spring when I open the shop back up it will just...

I found it it was not on the build chart I had out in the shop it was on the other paper that came with them (the brochure one) it says 7.3mm so that is about 3/8".... here is my fix I did up today, made a spacer out of 1/2" MDF Here is spacer set in cab, just need to do the mount holes now

I don't have that info with any of the paperwork they sent with my woofers only TS values is all I got for specs.... I agree these things put out incredible deep bass, they will be even better once final assembly is done right now I only have 4 bolts holding the woofer in and 6 bolts on the back...

Looks like Willy Wonkas candy factory!! lol

Well I figured since I had the woofer in the cab for test fitting I put the back on and a few bolts and hooked the amp to it and.... holy sheep shit batman!!! When I cranked it I heard a buzzing rattling sound from the driver, so I backed off and lowed the bass a bit and wow they shake...

These flared ports come with both ends have a flange, well only the outer one needs one for mounting but inside does not. So I cut the flange off and wala I don't have to go through all the work to relocate the hole, it is close but should be OK..... In the pic that is the actual length it will be

OK so you don't want to talk about it, that's cool So on the subs I am building..... Huston we have a problem... I had cut the hole for the port thinking I was going to be using a strait round 6" port. Well the flared port is much larger on the outer edge and will not clear the woofer. Soooo...

I didn't know you had one.... that's a dual monster amp right? Does that have a fan for cooling?

Here are some pics to show where I am going with these. I sprayed a bit of black on the baffle, that will be black and revile/trim pieces will be gun metal gray to match the 816's, they will also have carpet and the aluminum angle trim around the edges. I already fabricated the trim corner...

I got a pair of these about a year back... I like them but I don't think they are very popular https://headphonereview.com/on-ear/even-h3-review/

So I got the T nuts installed on the baffles, screwed and glues to the frames and then the lewon laminated over the baffles... all clamps on board

I ran my stock PL wide open all the time, I also ran my wopl wide open all last summer when it was in the shop, but the stock PL right channel let go and the wopl is in the house now connected to my little bose 301's so it is on easy street now, thought it is just to nice of an amp now to be out...

I have always had speakers that loved a lot of power... I'm finding this high efficiency thing very cool, like making a 4 cyl honda go 250mph on 90 hp

Thanks for the tip, I don't know a whole lot about routers, hardly ever used one. The one i have I bought used over 20 years ago at a thrift shop for $15 it's a cheepy B&D all plastic, no metal nothing, no speed control it is either on or off, but hey it is getting the job done. Really likeing...

Thanks guys for the comments.... Got the T nuts installed on the baffles for the woofers and one baffle glued and screwed to the frame. The mounting screw holes on these rockville woofers are to small for 1/4-20 bolts so I will need to enlarge them. I was routing the last lewon piece when the...

Had a good day out in the shop today on the cabs. Got the templates made up and routed the holes, they came out nice..... starting to look like Altecs now! :)

I think your talking about on the front baffle, right? Well I had thought about that if you look at the pic of the circle on the baffle you can see that the top and bottom of the 18" woofer are just about touching the solid frames, so there wil be no flexing there. the area between the sided of...