Search results

Creek A52 schematics

A classic amp in a working condition, checked on the bench. Again, sitting on eBay for a while. The amp is multi voltage but with a US plug. £400 (UK Pounds) + delivery at cost. Cheers Alex

I don’t remember working on your deck, so probably not that much ;) Cheers Alex

Mk II is a much better sounding deck than Mk III, especially after the modifications. Mk III is almost useless to modify even as the main limitation to the sound quality comes from Dolby chips used. Unless you remove these , there is no hope for it. Cheers Alex

The deck is in a decent condition, I put it on the bay a while ago but as it is for 120V I thought I should mention it here. I will be happy with £500 (UK Pounds) + delivery at cost. Or offers? The deck is in the UK. The following was done on the deck: The DD capstan motor elcaps all changed...

If you need that one for the level translation in the RS-B965, either ZVP2110 or BS250P will work just fine. Cheers Alex

Here is one of the gems of my collection for a (reluctant) sale. Shortly I'll list it on eBay but here it is now. The deck is in a very good condition (some small blemishes), complete, including the cassette window and the (UK plug) mains lead, operational on the first glance (I haven't run it...

I use a computer based analyzer (RME sound card + AudioTester software) for most measurements on cassette decks or cassettes, however I own for many years and maintain in a good working order a hardware analyzer - Amber Model 3501 Distortion and Noise Measuring System. There are times when this...

You shouldn't be surprised, this phono stage could hold its own against any other up to $10K range, either valve or solid state from my experience. Cheers Alex

Unfortunately, Black Gate caps are out of production for many years. I kept some stock for Kora 3T Limited Edition phono stages, though I am not making these since 2014 (except an occasional request from a friend ;) ) . Cheers Alex

No longer for sale, Cheers Alex

Bipolar (Non-Polar) electrolytic caps can be happily used in place of polar caps as long as the maximum voltage is not exceeded. If the DC voltage on the capacitor is low and polarity is not known or variable (as could be the case in many opamp based circuits in audio equipment), than Bipolar...

I would advise you to get a mains supply as well, just to keep the unit powered all the time. Black Gate caps need at least 300 hours run-in to sound good and keep improving further with time, a short interruption in not a problem but otherwise it is good to keep it on. The current consumption...

On the other side of the board ;) . There are only three MOSFETs per channel, the circuit is described on my website. The version for Vincenzo is called "Limited Edition", using different (no longer in production) devices, giving about 6dB lower noise than the BSS139 in the standard version...

It is alive and working just fine. Cheers Alex

From memory, this head was used in RS-M253X, RS-B85, RS-B100. Cheers Alex

This 682ZX came to me in a very sad state, with bits missing from the transport and with many faults, most likely it was used for swapping parts. I've restored the transport (including a replacement head mounting plate), replaced one dead Dolby chip, replaced orange caps and did some usual...

ReVox and Nakamichi you say...

It appears that I have some genuine Black Gate ("Standard") electrolytic caps gathering dust. After checking the current prices on "that place" I am tempted to sell some of my stash and before posting it elsewhere I thought it would be good to invite offers here. The following is available...

From the first video, it looks like the scope program loses synchronisation (green light blinks) and it looks like a “jump”. It is not real. Cheers Alex