My First WOPL 400 Series 2 Build
- Thread starter Dnspy007
- Start date
Nice work.
Don't forget you need to lace in two 22AWG wires to fused B- (plus a ground) to feed the Cylon meters.
See below for recently completed 400 SII with two Blue and one Black 22AWG to the left of the control board.
It's easier to add them now rather than waiting until after placing the bulk caps and tie wrapping all the wire bundles.
Don't forget you need to lace in two 22AWG wires to fused B- (plus a ground) to feed the Cylon meters.
See below for recently completed 400 SII with two Blue and one Black 22AWG to the left of the control board.
It's easier to add them now rather than waiting until after placing the bulk caps and tie wrapping all the wire bundles.
Nice work.
Don't forget you need to lace in two 22AWG wires to fused B- (plus a ground) to feed the Cylon meters.
See below for recently completed 400 SII with two Blue and one Black 22AWG to the left of the control board.
It's easier to add them now rather than waiting until after placing the bulk caps and tie wrapping all the wire bundles.
Don't forget you need to lace in two 22AWG wires to fused B- (plus a ground) to feed the Cylon meters.
See below for recently completed 400 SII with two Blue and one Black 22AWG to the left of the control board.
It's easier to add them now rather than waiting until after placing the bulk caps and tie wrapping all the wire bundles.
That sure is Purdy. Beautiful job Brother, you just keep making them look slicker with each build. If I can get mine to look half as neat as yours, I'll be tickled.
Made a little more progress this week. Watts DCP in and wired up, Backplane B- B+ wired in, IEC wired in, Cylon meter wires in. I believe it's ready for Caps, Buss Bar and ground wires. Let me know if I've overlooked anything. Should get the Meter sensitivity switch today. Eric was kind enough to point me in the right direction.(Thank You Sir) Thanks for looking.......
New Cylon Meter Boards....
New Cylon Meter Boards....