Skynyrd77's Thank Godamighty , Finally My Own WOPL Build Thread!!

Skynyrd77

Skynyrd77

Veteran and General Yakker
#701
Joined
Jan 12, 2014
Messages
3,971
Location
Mill creek Indiana
Tagline
lost in my own world
#701
laatsch55 said:
Those CV's won't go to 40?
Click to expand...
After hookin up this sub. I'm thinkin the guy that did the mod. Set these crossovers so they run more like a 2 way. I think he focused on the overall midrange because they are nice crisp great image. Vocals are centered they sound amazin but I've been blaming the brightness on this basment but that's my thought on this. I remember him sayin something about adjusting the woofer to like 20hz lower than the mids so they blend... All I know is now it sounds awesome as shit as a team. I could be way off base here but only my stoned thoughts!!
 
Gepetto

Gepetto

Administrator
Staff member
#703
Joined
May 15, 2011
Messages
14,170
Location
Sterling, MA
Tagline
Old 'Arn Enthusiast
#703
laatsch55 said:
Crossover is where it starts rolling off the signal. The Phase is for what Joe said...IF the pot is detended. If it's a continous pot I would say it's for tuning the sub to your regular speaks.

Joe, due to crossover differences couldn't an adjustable phase pot be used to compensate for phase lag in the main speak ctossover?
Click to expand...

Yes, the phase knob will adjust for many system things such as placement of the sub in the room and the phasing with your mains. Just adjust the phase knob to where the bass sounds maximum, that means that your mains and the sub are working in phase and in unison with the placement of each in the room (compensate for standing waves and reflections)

Set the xover to where your mains say that they give out. If the bottom of your mains is 50Hz for example, set the sub for 50
 
Skynyrd77

Skynyrd77

Veteran and General Yakker
#704
Joined
Jan 12, 2014
Messages
3,971
Location
Mill creek Indiana
Tagline
lost in my own world
#704
Gepetto said:
Yes, the phase knob will adjust for many system things such as placement of the sub in the room and the phasing with your mains. Just adjust the phase knob to where the bass sounds maximum, that means that your mains and the sub are working in phase and in unison with the placement of each in the room (compensate for standing waves and reflections)

Set the xover to where your mains say that they give out. If the bottom of your mains is 50Hz for example, set the sub for 50
Click to expand...
Makes sence. Gonna take some work to get it tuned in. I think I need to get it away from wall and in center of room. It's a unvented 12in sub in a 13x13x13 box with a 1000w amp. It's like a bomb lol
 
laatsch55

laatsch55

Administrator,
Staff member
#706
Joined
Jan 14, 2011
Messages
75,194
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#706
Joe, I noticed a few more spacers in this kit..........LMOAO!!!! man, you don't miss a trick....
 
laatsch55

laatsch55

Administrator,
Staff member
#708
Joined
Jan 14, 2011
Messages
75,194
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#708
Light board in.......wire the AC switch, back on with the faceplate, set the halfbiass one last time, put on the top and bottom covers and in the cabbage case it goes ....Jase tracking # Fed-Ex....770261362010
 

Attachments

Skynyrd77

Skynyrd77

Veteran and General Yakker
#709
Joined
Jan 12, 2014
Messages
3,971
Location
Mill creek Indiana
Tagline
lost in my own world
#709
Hell yeah Lee. Got busy dicking around came back and wala.... The book looks nice also tell your wife thank you so much... Early nxt week ill be WOPL1000ing it up!!!! I'm doin a 12:30 jig now. Gonna smoke another for celebration
 
laatsch55

laatsch55

Administrator,
Staff member
#710
Joined
Jan 14, 2011
Messages
75,194
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#710
Gotta get yours outta the way.....Przems made it today...the UPS guy said it was the first box he ever carried from Poland....
 
You must log in or register to reply here.
Top