Skynyrd77's Thank Godamighty , Finally My Own WOPL Build Thread!!

Finally got the AC run (blue and white wires ) and figured out what I want to do with the rest of em...
 

Attachments

  • SAM_0289.jpg
    SAM_0289.jpg
    99.8 KB · Views: 31
  • SAM_0290.jpg
    SAM_0290.jpg
    95.6 KB · Views: 32
Finally got the AC run (blue and white wires ) and figured out what I want to do with the rest of em...

Is it just setup diff then other 700's ? Is that why you have to figure out the wire route. Or is it something you've been trying to do for awhile now?
 
Is it just setup diff then other 700's ? Is that why you have to figure out the wire route. Or is it something you've been trying to do for awhile now?

Exactly Jase, the ol mind has been churning on this for awhile....trying to lower the noise floor even more....
 
Kitty cuddles.....
 

Attachments

  • SAM_0292.jpg
    SAM_0292.jpg
    91.7 KB · Views: 24
  • SAM_0291.jpg
    SAM_0291.jpg
    91.6 KB · Views: 28
At the rate were going were looking at the 8 ohm post/watt ratio but if it takes to long we might hit the 4 ohm lmao

If we get past 774 posts Lee will just have to keep on modding till he can make the output match the post count.
 
Here's a dumb ass ? For whoever wants it. What is the diff between a quasi and a fully comp output??? Don't forget I need English so maybe orange shouldn't awnser this one for me. Lmfao
just giggin you orange kinda..
 
Jase, it's basically being able to use complementary outputs , the MJ21195, MJ21196 pairs as opposed to running all MJ 21196's and using a phase inverter in the driver. It's more symmetrical on output, better voltage balance , better distortion and bigger soundstage........not much.....


The big black wires on the BR are #12 silver/teflon (thanks Navo) this is a first for that position....
 

Attachments

  • SAM_0294.jpg
    SAM_0294.jpg
    89.6 KB · Views: 35
  • SAM_0293.jpg
    SAM_0293.jpg
    95 KB · Views: 36
Jase, it's basically being able to use complementary outputs , the MJ21195, MJ21196 pairs as opposed to running all MJ 21196's and using a phase inverter in the driver. It's more symmetrical on output, better voltage balance , better distortion and bigger soundstage........not much.....


The big black wires on the BR are #12 silver/teflon (thanks Navo) this is a first for that position....

Oh ok ic how that could have its advantages.
 
Rail fuses wired up...
 

Attachments

  • SAM_0296.jpg
    SAM_0296.jpg
    93 KB · Views: 37
Lee's trucking now. Wish they had the symbol of the Ol keep on truckin logo lmao. Anybody remember that.
 
Back
Top